Fujitsu T3010D manual U T I O N, Exiting from Main Menu, Heads Number between

					M a i n M e n u
Menu Field	Options		Default	Description
Heads:	■	A number between	–—	This item is active only when Hard Disk is selected as type. You can
		1 and 16		change the value by incrementing (pressing the [Spacebar]) or by
				typing in the number.
Sectors:	■	A number between	–—	This item is active only when Hard Disk is selected as type. You can
		0 and 63		change the value by incrementing (pressing the [Spacebar]) or by
				typing in the number.
Maximum	■	Display only	–—	Displays the maximum capacity of the drive calculated from the
Capacity:				parameters of the hard disk when Auto is selected and the type
				is identified as hard disk.
Multi-Sector	■	Disabled	[16 Sectors]	This option cannot be changed when Auto is selected. Specify the
Transfers:	■	2 Sectors		number of sectors per block for multiple sector transfer.
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
LBA Mode Control:	■	Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder,
	■	Enabled		Head, Sector addressing. This option cannot be changed when Auto
				is selected.
Transfer Mode:	■	Standard	[Multiword	Selects the method for moving data to/from the drive. Autotype the
	■	Fast PIO 1	DMA 2]	drive to select the optimum transfer mode. This option cannot be
	■	Fast PIO 2		changed when Auto is selected.
	■	Fast PIO 3
	■	Fast PIO 4
	■	Multiword DMA 1
	■	Multiword DMA 2
Ultra DMA Mode:	■	Disabled	[Disabled]	Selects the method for moving data to/from the drive. Autotype the
	■	Mode 0		drive to select the optimum transfer mode. This option cannot be
	■	Mode 1		changed when Auto is selected.
	■	Mode 2
	■	Mode 3
	■	Mode 4
	■	Mode 5

C A U T I O N

■A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations.

■Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu or to move to another menu.

7