Fujitsu MB9B500 Series 3 Don’t use Flash loader file, How to Make a HEX File, Use Flash debug

Page 27

3)Don’t use Flash loader file.

Figure 5-14: Flash Loader File Disabled

If user need to program the hex file into Flash via UART or USB programmer, a hex file need to be produced first.

How to Make a HEX File

1)Use Flash debug

2)Select “Generate additional output” in “Output Converter” table.

Figure 5-15: Hex File Genration in IAR IDE

3)User can find the generated file in path (../Debug/Exe)

Image 27

Contents APPLICATION NOTE FUJITSU SEMICONDUCTOR SHANGHAI LIMITEDMB9B500 Series 32-BIT MICROCONTROLLERALL RIGHTS RESERVED 2011-04-21 Revision HistoryDate Version3 FLASH ON-BOARD PROGRAMMING 2 HARDWARE SETTINGREVISION HISTORY 1 INTRODUCTION1 Introduction 1.1 Product Overview1.2 MB9B506 Series MCU 1.3 Board Features AD channel 2 Hardware SettingTable 2-2 Setting for UART On-Board Programming 2.3 Setting for UART On-Board Programming2.4 Setting for USB On-Board Programming 2.2 Jumpers Overview2.5 Setting for Debug Tool „ Use IAR J-Link„ Use Keil U-Link ME 3.1 On-Board Programming via UART 3 Flash On-Board ProgrammingFigure 3-5 COM Port in Device Manager 3.2 On-Board Programming via USBFigure 3-7 Press Reset Button Figure 3-4 USB Device SignFigure 3-8 Start Programming „ Press reset key on the board. Programming will start4 Sample Code „ Usage 4.1 UART„ Hardware Setting „ FlowchartFigure 4-3 Send UART Data From PC Side Flowchart 4.2 Nand Flash4.3 RTC „ Hardware Setting None „ Flowchart„ Block Diagram 4.4 CAN4.5 USB Function 4.6 USB Host 4.7 LCD & AD & Key Figure 5-1 J-Link Overview Figure 5-2 U-Link Overview 5 Debug Tool and IDEWatch window Main window 5.1 Debug with J-Link in IAR EWARM Workbench„ Run an Existed Project Tool bar Project list Log windowFigure 5-6Rebuild All 2 Select a project eww file3 Click “Project Rebuild All” Figure 5-5 Select a Project„ Setting for Flash Debug 2 Don’t select “Use macro files” in “DebuggerSetup” table Figure 5-10 Macro File DisabledFigure 5-11 Flash Load File Path Figure 5-12 ICF File for RAM Debug „ Setting for RAM Debug2 Select “Use macro files” in “DebuggerSetup” table Figure 5-13 Macro File Enabled1 Use Flash debug „ How to Make a HEX FileFigure 5-14 Flash Loader File Disabled 3 Don’t use Flash loader fileFigure 5-17 Open a Project 5.2 Debug with U-Link ME in Keil uVision4Tool bar Project list Build output Figure 5-16 Keil IDE OverviewFigure 5-18 Select a Project 2 Select a project uvproj file3 Rebuild all 4 Start debugFigure 5-21 Debug Tool Bar Figure 5-22 ROM Address Setting for Flash DebugFigure 5-23 Don’t use initialization File 3 Check “Update Target before Debugging” checkboxFigure 5-24 Select Update Target Before Debugging 2 Don’t use initialization fileFigure 5-26 Select Initialization File 1 Set ROM address in Code SRAM area. 0x1fff8000-0x1fffffff2 Set initialization file path. ..\DebugRAM.ini Figure 5-25 Set RAM Address for RAM DebugFigure 5-28 HEX File Generation in Keil IDE Figure 5-27 Select Update Target Before Debugging„ Sample code 6 Materials Download„ Software „ Document