Fujitsu N6220 manual Fields, Options and Defaults for the Information Menu, Field Name Description

I n f o r m a t i o n M e n u

INFORMATION MENU – VIEWING CURRENT SYSTEM PARAMETERS

The Information Menu allows you to view the current system parameters. This is the default screen, and cannot be changed directly.

The following tables show the names of the menu fields for the Information menu. This screen reflects the current system settings.

	Insyde Software SCU							2005/10/11			5:05:34 PM
Main			Advance	Security		Boot Exit
		System							CPU
		Primary Master:			HTS726060M9AT00				Intel(R) Pentium(R)		M 760
		Primary Slave:			MATSHITADVD-RAM UJ-841S
		Secondary Master: HTS726060M9AT00							Speed:	2 GHz
		BIOS Version:			x.xx				L1 Cache:		64 KB
									L2 Cache:		2048 KB
		BIOS Date:			xx/xx/xx
		BIOS Area:			E000h - FFFFh
		Supervisor Password Is:					Clear		Memory
		User Password Is:					Clear
		Primary Master Password Is:					Clear		Total:	512 MB
		Secondary Master Password Is:					Clear
									Slot 1:	512 MB DDR2
		Owner Information Is :					Clear		Slot 2:	0 MB DDR2
		Asset Number :			None

Configures startup conditions (fast boot, password. etc)

Figure 1. Information Menu

Table 1: Fields, Options and Defaults for the Information Menu

Note that the parameters shown in the figure may vary depending upon your system’s configuration.

Block Name			Field Name			Description
System	■	Primary Master:		■	Supervisor Password Is:	The System block contains information about the sys-
	■	Primary Slave:		■	User Password Is:	tem setup, including current password statuses,
	■	Secondary Master:		■	Primary Master Password Is:	installed drives, BIOS version and location, and owner
	■	BIOS Version:		■	Secondary Master Password Is:	information. For information on changing this infor-
	■	BIOS Date:		■	Owner Information Is:	mation, see the appropriate section of this manual.
	■	BIOS Area:		■	Asset Number:
CPU	■	Processor Name		■	L1 Cache:	The CPU block provides information about the type
	■	Speed:		■	L2 Cache:	and speed of the processor, and the size of the
						cache(s).
Memory	Total:					The Memory block displays the size and location of
	Slot 1:					the currently installed memory.
	Slot 2:

3