Fujitsu N6220 manual Ings, Standard, Fast PIO, Ultra ATA-66, Ultra ATA-100 A.R.T Support Enabled

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Main Menu -> IDE Settings Submenu – Setting the timing and ATI/ATAPI Device

The IDE Settings submenu of the Main menu allows you to select a speed for the hard disk drive, which device(s) to use, and whether to support SMART functions.

The following figure shows the IDE Settings submenu.

			IDE Settings
ings			MHT2100AT
		A DVD-RAM UJ-831S			SELECT DEVICES			Speed :
HDD Timing
(	)	Standard		[	]	PRIMARY MASTER DEVICE
rsion :	x.xx			[	]			L2	ache :
(	)	Fast PIO				PRIMARY SLAVE DEVICE
te : (	)xx/xx/xMultiwordx		DMA	[	]	SECONDARY MASTER DEVICE
ea : (	)E000hUltra- FFFFhATA-33			[	]	SECONDARY SLAVE DEVICE
(	)	Ultra ATA-66						Memory
(	)	Ultra ATA-100
				S.M.A.R.T.			Support	Enabled
sor Password Is :			Clear
ssword Is :			Clear
Master Password Is :Clear						Cancel		Total :		51
			OK					Slot 1 :		25
nformation Is :			Clear					Slot 2 :		25

Figure 4. IDE Settings Submenu

Table 4: Fields, Options and Defaults for the IDE Settings Submenu

Note that the parameters listed in the following table may vary depending upon your system’s configuration.

Menu Field	Options		Default	Description
IDE Settings	HDD Timing:		[Ultra ATA-100)	Select the timing for the hard drive or select [Stan-
				dard] to disable the feature. If the hard drive cannot
	■	Standard		support a selected speed, it will choose the next one
	■	Fast PIO		available. (Figure 4)
	■	Multiword DMA
	■	Ultra ATA-33
	■	Ultra ATA-66
	■	Ultra ATA-100
	Select Devices:		[Primary Master Device/	Selects the ATA/ATAPI device(s) to use. (Figure 4)
			Secondary Master Device]
	■	Primary Master Device
	■	Primary Slave Device
	■	Secondary Master
		Device
	■	Secondary Slave Device
	S.M.A.R.T. Support:		[Enabled]	Enables or disables the SMART function, which per-
				forms such services as self-monitoring and analysis.
	■	Disabled		(Figure 4)
	■	Enabled

6