Fujitsu N6220 manual Video Features Submenu of the Advance Menu, Display Auto Compensation Enabled

A d v a n c e M e n u

Video Features Submenu of the Advance Menu

The Video Features Submenu is for setting the display parameters.

Note that after booting the system, the display parameters are determined by the Windows video driver.

ITADVD-RAM UJ-831S				Speed:
		Video Features		L1 Cache:
Configurations
				L2 Cache:
	Display :
x				Auto
	Compensation :			Enabled
FFFFh
				Memory
:		OK	Cancel
	Clear
Is :Clear				Total:

Figure 7. Video Features Submenu

Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advance Menu

Menu Field	Options		Default	Description
Display:	■	Auto	[Auto]	Selects where the video signal will be routed.
	■	Internal
		Flat Panel
	■	External
Compensation:	■	Disabled	[Enabled]	Enables or disables compensation which controls spacing on the display. When
	■	Enabled		enabled, displays with less than pixel resolution 1024 x 768 or 800 x 600 will still
				cover the entire screen. A resolution below 800 x 600 will fill the screen, but due
				to the low resolution, will appear blocky and may not be acceptable.

Internal Device Configurations Submenu of the Advance Menu

The Internal Device Configuration submenu allows the user to configure other internal devices.

HITADVD RAM UJ 831S			Speed:
	Internal Device Configuration
Configurations			L1 Cache:
			L2 Cache:
xx
	LAN Controller:		Enabled
- FFFFhWireless LAN:			Enabled
g
:	Clear		Memory
		OK	Cancel
	Clear
d Is :Clear			Total:
			Slot 1:

Figure 8. Internal Device Configuration Submenu

Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advance Menu

Menu Field	Options		Default	Description
LAN Controller:	■	Disabled	[Enabled]	Enables or disables the LAN controller.
	■	Enabled
Wireless LAN:	■	Disabled	[Enabled]	Enables or disables the wireless LAN.
	■	Enabled

9