L i f e B o o k E S e r i e s – S e c t i o n 3
Display Panel Latch
Display Panel
Figure 3-2 Opening the Display Panel
Power Management Utility
(only in models with Windows 98 Second Edition)
Your Fujitsu LifeBook contains a display panel that is backlit for easier viewing in bright environments and maintains top resolution through the use of active- matrix technology.
OPENING THE DISPLAY PANEL
1.Press the latch located at the top of the display panel. This releases the locking mechanism and raises the display slightly.
2.Lift the display panel backwards, being careful not to touch the screen, until it is at a comfortable viewing angle.
ADJUSTING DISPLAY PANEL BRIGHTNESS
Once you have turned on your LifeBook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are two ways to adjust the brightness keyboard and power management utility
Keyboard
■[Fn+F6]: Pressing repeatedly will lower the brightness of your display.
■[Fn+F7]: Pressing repeatedly will increase the brightness of the display.
P O I N T
If using AC power, your LifeBook’s brightness setting is set to its highest level by default. If using battery power, the brightness setting is set to its middle level by default.
1.
2.Slide the brightness control bar to the right to increase brightness or left to decrease brightness.
You may need to readjust the brightness level periodi- cally depending on your operating environment.
P O I N T
The higher the brightness level, the more power the LifeBook will consume and the faster your batteries will discharge. For maximum battery life, set the brightness level as low as possible.
CLOSING THE DISPLAY PANEL
1.Holding the edge of your display panel, pull it forward until it is flush with the body of your LifeBook.
2.Push down until you hear a click. This will engage the locking mechanism and prevent your display panel from opening unexpectedly.
38