Fujitsu A531, AH531 manual Printer does not print, Radio connection to a network does not work

Page 71

		Troubleshooting and tips

The printer does not print

Cause		Troubleshooting
The printer is not switched on.		► Make sure that the printer is switched
		on and ready for operation (refer to the
		documentation supplied with the printer).
The printer is not connected correctly.		► Check that the data cable connecting
		the notebook to the printer is properly
		connected.
The printer driver is faulty or not correctly		► Check that the data cable connecting
installed, or it is the wrong printer driver.		the notebook to the printer is properly
		connected.
		► Check whether the correct printer driver is
		loaded (refer to the printer documentation).
The radio connection to a network does not work

Cause		Troubleshooting
The wireless component is disabled.		► Switch the radio component on (see
		"Switching the wireless components on and
		off", Page 42).
The wireless component is enabled. Despite		► Check whether the radio connection is
this, the wireless connection to a network does		switched on via the software.
not work.		► Further information on using the radio
		component can be found in the help ﬁles.
Acoustic warnings

Cause		Troubleshooting
A beep sounds every few seconds.		► Charge the battery.
The battery is almost ﬂat.

Fujitsu Technology Solutions

67

Image 71

Contents Lifebook A531 Lifebook AH531 Page Page Copyright Lifebook A531 Lifebook AH531 Page Contents Removing and installing components during servicing Regulatory information for notebooks without radio device Contents Innovative technology Innovative technologyFurther information This font Not switch off the deviceNotational conventions Front Ports and controlsPorts and controls Right-hand side Ports and controls Left panelPorts and controls Underside Important notes Safety notesImportant notes Energy saving under Windows Additional safety notes for devices with radio componentsEnergy saving Before you travel Travelling with your notebookCleaning the notebook Unpacking and checking the device First-time setup of your deviceFirst-time setup of your device Selecting a location Mains adapter connectingSwitching on the device for the ﬁrst time Working with the notebook Status indicatorsWorking with the notebook Drive indicator Wireless components indicatorPower-on indicator/Standby Battery charging indicator/power connectorSwitching on the notebook + = KeyboardCaps Lock key Key Working with the notebook Description Backspace keyTab key Enter key returnVirtual numeric keypad Key combinations Switching the wireless components on / offSeparate numeric keypad device-dependent Windows security/Task-Manager Power management functionsSwitch between open applications Display if an external monitor is connectedMoving the pointer Country and keyboard settingsTouchpad and touchpad buttons Dragging items Executing commandsSwitching the Touchpad on and off Selecting an itemBackground lighting LCD screenExample Webcam Rechargeable batteryBattery storage Charging, caring for and maintaining the batteryRemoving and installing the battery Monitoring the battery charging levelRemoving the battery Handling data carriers Optical driveInserting or removing a data carrier CD/DVD indicatorManual removal emergency removal Using the power-management features Inserting the memory card Memory cardsSupported formats Removing the memory card Inserting the card ExpressCardsRemoving the card Loudspeakers and microphonesRemoving the SIM card SIM card devices with Umts moduleInserting the SIM card Access via Umts Wireless LAN / Bluetooth / UmtsSwitching the wireless components on and off Setting up Wlan accessEthernet and LAN Security functions Security functionsUse Kensington Lock Protecting Bios Setup Utility supervisor and user password Conﬁguring password protection in Bios Setup UtilityChanging the supervisor or user password Password protection for booting of the operating systemActivating hard disk protection Password protection for the hard diskDisconnecting devices from the notebook Connecting external devicesConnecting external devices Connecting devices to the notebookHdmi port Connecting an external monitorDevice drivers Connecting USB devicesHow to remove USB devices correctly Headphone port Connecting external audio devicesMicrophone port/Line Removing and installing components during servicing Removing and installing components during servicingPreparing to remove components Installing and removing memory expansionRemoving memory modules Removing the coverSecuring the cover Installing a memory moduleRemoving a cover Removing and installing the hard diskRemoving a hard disk Installing a hard disk Attaching the cover Finishing component removalSettings in Bios Setup Utility Settings in Bios Setup UtilityStarting the Bios Setup Utility Operating Bios Setup UtilitySave Changes and Power Off Exiting Bios Setup UtilityLoad Setup Defaults Copy Standard Entries Troubleshooting and tips Troubleshooting and tipsRestoring the hard disk contents under Windows Help if problems occurLCD screen is difﬁcult to read Troubleshooting and tips CauseCause Troubleshooting External monitor is blank or the image is unstable External monitor remains blankLeave energy saving mode Acoustic warnings Printer does not printRadio connection to a network does not work Error message/cause Resolution Error messages on the screenPrevious boot incomplete Default conﬁguration Mains adapter 80 W Technical dataPower adapter, 65 W Declarations of Conformity Manufacturer’s notesEnergy Star Disposal and recyclingCE marking for devices with radio component CE markingRegulatory notices Regulatory information for notebooks without radio deviceManufacturer’s notes Avis Aux Utilisateurs Du Réseau Téléphonique Canadien DOC Industry Canada noticesFor Authorized Repair Technicians Only UL NoticeFCC Radio Frequency Exposure statement FCC regulatory information for notebooks with radio deviceFederal Communications Commission statement FCC Interference StatementExport restrictions Manufacturer’s notes Regulatory Information/DisclaimersIndex FaultIndex Handling Index Switch