|
|
|
| A d v a n c e d M e n u |
|
|
|
|
|
Table 4: Fields, Options and Defaults for the Serial/Parallel | ||||
Port Configurations Submenu of the Advanced Menu |
|
| ||
|
|
|
| |
Menu Field | Options | Default | Description | |
|
|
|
| |
Serial Port: | • Disabled | [Enabled] | Configures the serial port using either no configuration | |
| • Enabled |
| (Disabled), a user defined configuration (Enabled), or by | |
| • Auto |
| allowing the BIOS or OS to choose the configuration (Auto). | |
|
|
|
| |
I/O Address: | • 3F8 - 3FF | [3F8 - 3FF] | Allows user to set the serial port base I/O address when serial port | |
| • 2F8 - 2FF |
| is Enabled. | |
| • 3E8 - 3EF |
|
|
|
| • 2E8 - 2EF |
|
|
|
|
|
|
| |
Interrupt: | • IRQ 3 | [IRQ 4] | Allows user to set the serial port interrupt when serial port | |
| • IRQ 4 |
| is Enabled. | |
| • IRQ 5 |
|
|
|
|
|
|
| |
Infrared Port: | • Disabled | [Enabled] | Configures the infrared port using either no configuration | |
| • Enabled |
| (Disabled), a user defined configuration (Enabled), or by | |
| • Auto |
| allowing the BIOS or OS to choose the configuration (Auto). | |
|
|
|
| |
Mode: | • IrDA | [FIR] | When the infrared port is enabled this option is available allowing | |
| • FIR |
| the user to set the mode for the infrared port. | |
|
|
|
| |
I/O Address: | • | [2E8 - 2EF] | Allows user to set the infrared port I/O address when the | |
| • |
| infrared port is Enabled. | |
| • 3E8 - 3EF |
|
|
|
| • 2E8 - 2EF |
|
|
|
|
|
|
| |
Interrupt: | • IRQ 3 | [IRQ 3] | Allows user to set the infrared port interrupt when the infrared | |
| • IRQ 4 |
| port is Enabled. | |
| • IRQ 5 |
|
|
|
|
|
|
| |
I/O address: | • 100 - 107 | [118 - 11F] | Allows user to set the infrared port I/O address when the | |
| • 108 - 10F |
| infrared port is Enabled. | |
| • 110 - 117 |
|
|
|
| • 118 - 11F |
|
|
|
|
|
|
| |
DMA Channel: | • DMA 1 | [DMA 3] | Allows user to set the infrared port DMA Channel when the | |
| • DMA 3 |
| infrared port is Enabled. | |
|
|
|
| |
Parallel Port: | • Disabled | [Enabled] | Configures the parallel port using either no configuration | |
| • Enabled |
| (Disabled), a user defined configuration (Enabled), or by | |
| • Auto |
| allowing the BIOS or OS to choose the configuration (Auto). | |
|
|
|
| |
Mode: | • Output Only | When the parallel port is enabled this option is available allowing | ||
| • |
| the user to set the mode for the parallel port. | |
| • ECP |
| ||
|
|
| connected parallel device. Output Only (Half Duplex) allows | |
|
|
| information to be transferred in only one direction, from your | |
|
|
| notebook to the printer or similar device. ECP Mode allows | |
|
|
| communication with the ECP class of parallel I/O devices. | |
|
|
|
| |
I/O address: | • 378 - 37F | [378 - 37F] | Allows user to set the parallel port base I/O address when the | |
| • 278 - 27F |
| parallel port is Enabled. | |
| • 3BC - 3BF |
|
|
|
|
|
|
| |
Interrupt: | • IRQ 5 | [IRQ 7] | Allows user to set the parallel port interrupt when the parallel | |
| • IRQ 7 |
| port is Enabled. | |
|
|
|
|
|
11