Fujitsu B-2562 Fields, Options and Defaults for the Security Menu, Main Advanced, Power Boot

L i f e B o o k B S e r i e s B I O S

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Power	Boot	Info	Exit
Supervisor Password Is:			Clear			Item Specific Help
User Password Is:			Clear		Press <Enter> key to
Set Supervisor Password			[Enter]		set Supervisor password
Set User Password			[Enter]		to enable any password
Minimum User Password Length			[0]		features.
Password on Boot:			[Disabled]		Then password entry is
Boot from Removable Media:			[All]		required to enter BIOS
Floppy Disk Access:			[All]		Setup.
▲Hard Disk Security
▲Owner Information
Hard Disk Boot Sector:			[Normal]
Security Panel on Resume:			[Enabled]

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/SpaceChange Values Enter Select ▲Sub-Menu

F9 Setup Defaults

F10 Save and Exit

		Figure 13.	Security Menu
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field	Options	Default	Description
Supervisor	–—	Clear	A display-only field. Set is displayed when the system supervisor
Password is:			password is set and Clear when it is not.
User Password is:	–—	Clear	A display-only field. Set is displayed when the general user
			password is set, and Clear when it is not.
Set Supervisor	–—	[Enter]	Sets, changes or cancels the Supervisor Password. The Supervisor
Password			Password may be up to seven characters long and must include
			only letters or numbers (no symbols). Passwords are NOT
			case- sensitive. To cancel a password press the Enter key instead of
			entering characters in the Enter New Password field and in the
			Re-enter New Password field. When a Supervisor Password is set
			it must be used to access the BIOS setup utility.
Set User Password	–—	[Enter]	This field can only be accessed if the Supervisor Password is set.
			Sets, changes or cancels the User Password. The User Password
			may be up to seven characters long and must include only letters
			or numbers (no symbols). Passwords are NOT case-sensitive. To
			cancel a password press the Enter key instead of entering charac-
			ters in the Enter New Password field and in the Re-enter New Pass-
			word field. When a User Password is set it must be used to access
			the BIOS setup utility.
Minimum User	–—	[0]	–—
Password Length:

22