P o w e r M e n u
Advanced Features Submenu of the Power Menu
The Advanced Features submenu is for setting some
PhoenixBIOS Setup Utility
Power
|
|
|
|
|
| Advanced Features | Item Specific Help |
| |
|
|
|
|
|
| Suspend/Resume Switch: | [Enabled] | Configures the |
|
| Lid Closure Suspend: | [On] | Suspend/Resume switch. |
|
| Lid Open Resume: | [Off] |
|
|
| Resume on LAN: | [Off] |
|
|
| Serial Mouse Activity: | [Disabled] |
|
|
| Performance Control: | [Fixed] |
|
|
|
|
|
|
|
|
|
|
|
|
F1 | Help | Select | Item | Change | Values | |
ESC | Exit | Select | Menu | Enter | Select | ▲ |
Figure 17. Advanced Features Submenu
F9 Setup Defaults
F10 Save and Exit
Table 17: Fields, Options and Defaults for the Advanced Features Submenu of the Power Menu
Menu Field | Options | Default | Description |
|
|
|
|
Suspend/Resume | • Disabled | [Enabled] | Sets the function of the Suspend/Resume button when your note- |
Switch: | • Enabled |
| book is in an active state. The resume function can not be disabled |
|
|
| as it works regardless of any other settings.+ |
|
|
|
|
Lid Closure | • Off | [On] | Enables and disables having closure of the Display panel put your |
Suspend: | • On |
| notebook in Suspend mode. |
|
|
|
|
Lid Open Resume: | • Off | [Off] | Enables and disables having opening the Display panel acting as an |
| • On |
| automatic resume. |
|
|
|
|
Resume On LAN: | • Off | [Off] | When this feature is set to On, the system will wake when the inter- |
| • On |
| nal LAN device receives a Magic Packet while in Suspend Mode. |
|
|
|
|
Serial Mouse | • Disabled | [Disabled] | Enables and disables having activity on the serial port cause the sys- |
Activity: | • Enabled |
| tem to reactivate from inactivity timeouts. |
|
|
|
|
Performance | • Auto | [Fixed] | Enables and disables the ACPI Performance Control. |
Control: | • Fixed |
|
|
|
|
|
|
Exiting from Power Menu
When you have finished setting the boot parameters with the Power menu, you can either exit from the setup utility or move to another menu. If you wish to exit from
the setup utility press the [Esc] key to go to the Exit menu. If you wish to move to another menu, use the cursor keys.
29