IBM manual Session Enter a name for your session, Ending a Session, Use Main Menu TN5250

1-6	Chapter 1
	3 In the Open Session menu with the Tab key select:
	a	Session: Enter a name for your session.
	b	Host Name: (skipping Auto Start) Enter the address of the server.
	c	Port Number: Specify 23 or other appropriate number.

4 Skip IBM Terminal Type, and press Ctrl. Your initial session will be opened.

❖ Note The maximum number of simultaneous open sessions is three.

Ending a Session	You can end a session in one of two ways:
	1 Press Alt + x, while a session is displayed:
	a	Terminal emulation ends.
	b	The terminal user interface displays.
	If other sessions are active, the Open Session menu displays. You can end
	all open sessions by repeating the steps in 1 for each session, or resume a
	previous session. The terminal user interface will display only after all
	active sessions are ended.
	2 Use Main Menu - TN5250:
	a	Press Alt + ?, displaying Main Menu - TN5250.
	b	Position the cursor at Exit TN5250.
	c	Press Ctrl.
	The terminal user interface displays. See Chapter 2, “The Menu System,”
	for more information about ending TN5250 sessions.