IBM TN5250 manual Open Session Menu Functions Field Description

2-6	Chapter 2
	Figure 2-4 Open Session Menu
				Open Session
		*Session	______________________________
		Auto Start	no____		[Default Values]
		*Host Name *DFLT__________________________ OCS_Gateway
		Port Number		*DFLT	23
		*IBM Terminal Type		*CALC____________	IBM-5251-11
		Right Ctrl:Current Selection			Tab:Next Field
		F1:Help		F3:Exit Menu	F4:List
		F5:Refresh		F6:Save	F12:Prev Menu

The parameters displayed in this menu appear as data entry fields. To use these fields:

1Position the cursor to the left of each field in the menu, and enter the appropriate data.

2Press F6 to save your data and exit the menu.

Table 2-3 describes the data fields in the Open Session menu.

Table 2-3 Open Session Menu Functions

Field	Description
Session	Type the name of your session in this field.
Auto Start	Type a yes or a no in this field. Yes prompts
	the emulator to start the session immediately
	after exiting this menu.
Host Name	Enter the name of the host to which you want to
	connect.
Port Number	In this field, type the number of the port to which
	you want to connect. The recommended entry for
	TN5250 is 23.
IBM Terminal Type	Enter the type of terminal to which you are
	connecting.