Fujitsu 6000/SS user manual Turning On the Power

Page 32

6 Turning On the Power

This section explains how to turn on the power.

■Notes on power-on

●The power lamp lights up in orange in the standby mode.

●Before turning on the PC power, confirm that the display is connected to the PC unit. If the PC power is turned on with the display disconnected, the system fails to recognize the display adapter and the screen may not be displayed normally. In this case, analog display users should connect the display, terminate the OS, turn off the PC and turn on the PC again.

●When you use a digital display that takes power directly from a wall outlet, make sure that it is turned on before turning on the PC. The digital display does not work if it is turned on after the PC unit. Turn off the PC unit once and turn on the display and turn on the PC unit.

●When the power cable of the display is connected to the PC, the display power is turned on or off automatically when the PC power is turned on or off. Therefore, once the power switch on the display is pressed, subsequent operation is not necessary.

Therefore, the display power is automatically turned on each time the power switch on the PC is pressed as in Step 2 below.

●If the screen display is not centered, check if the screen refresh rate is set in accordance with the display. If the problem persists, adjust the display.

●When turning on the power after turning it off, or turning off the power after turning it on, wait at least 10 seconds.

●At the beginning of a screen display (such as the Windows startup and shutdown screen) or when the display mode is changed (for example, from the power-saving mode to the normal mode), the screen may be distorted temporarily or display horizontal lines. This does not indicate a fault.

●When the PC is turned on, the system performs POST (Power-On Self-Test) to check the internal hardware components. Meanwhile, the Fujitsu logo appears on the screen. Do not turn off the system during POST.

●When the upper cover has been removed for installing a built-in option, make sure that the cover is installed before turning on the power.

22

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Deskpower 6000/SS Series User’s Manual Important Safety Instructions Iii For Safe Operations Safety product applicationsBefore Starting Your PC Conventions used in this manual PointCommand entry from keyboard CD-ROM drive\setup.exe Sample screensDiskcopy a a IllustrationsVii Manual configuration IntroductionContents Installing Expansion Cards ProblemsMaintenance of the Hardware Security of the Case Other PrecautionsChapter Part Names and Functions Front of the PC unitPower switch Power lampHard disk access lamp VolumeBack of the PC unit Keyboard connector Connect the keyboard Serial connector Parallel connectorCRT connector DVI connectorPower supply unit Internal hard disk Inside the PC unitInternal battery Floppy connector FDDMotherboard Dimm slotsKeyboard Caps Lock/Alphanumeric key Ctrl control keyWindows key Alt keyUsing the mouse Using the mouse buttonsMouse Moving the mouseDouble-clicking PointingDragging ScrollingInstallation Installation areaVertical placement Mounting the feetMount the feet on the PC unit Single footDisassemble the feet Mount one of the feet on the PC unitHorizontal placement Place the PC unit on the disassembled feetExample of installation Horizontal placementConnection Connect the power cable to the outlet Connect the power cable to the displayConnect the mouse Connect the keyboardConnect the LAN cable Connect the LAN cable to the networkPage Connecting the power cable Page Turning On the Power Press the power switch on the PC Turning on the powerPress the power switch on the display Turning Off the Power Turning off the powerFor Windows NT For WindowsPower is automatically turned off. The PC is reset Resetting Resetting the PCClick the Restart button, then click OK CD-ROM Inserting or removing a CD Inserting a CDPress the Eject button Pull the tray with handsRemoving the CD Inserting a floppy disk Floppy DiskInserting or removing a floppy disk Point Press the floppy disk eject button Confirm that the floppy disk access lamp is offRemoving the floppy disk Hard Disk Hardware Before Installing a Peripheral Device What are peripheral devices?Have you finished Windows setup? Install one peripheral device at a timeDo not start work immediately after turning off the power Do not disassemble the power supply unitRemoving the Cover Removing the upper coverIncreasing the Memory Capacity Memory module combinations Location of memory modulesApplicable memory modules Installing memory modules Pull the hooks on both sides of the slot outwardInsert a memory module into the slot Reinstall the reinforcement bracketInstall the expansion card mounting bracket Reinstall the upper cover Installing Expansion Cards Location of expansion cards Applicable expansion cardsInsert the expansion card into the slot Installing an expansion cardRemove the slot cover Turn on the PC For Windows 95/98/2000/Me model For Windows NT modelTroubleshooting Problems PC cannot be turned on or the power lamp does not light up Characters entered using the keyboard are not displayedData cannot be read from the CD-ROM drive Mouse cursor does not moveNetwork connection cannot be established Technical Information Maintenance of the Hardware Maintenance of the PC unitMaintenance of the keyboard Maintenance of CDsMaintenance of the mouse Remove the ball and clean with waterClean inside the mouse Remove the mouse bottom coverCleaning of the floppy disk drive Windows 98/Me/2000/NT modelsSecurity of the Case Engage a lock you prepared with the mounting bracketOther Precautions Precautions on PCPrecautions on television/radio Preventing Television or Radio InterferencePrecautions on using display Precautions on using analog LCDAdjustment of analog display screen position USB keyboard Windows 98 modelReplacement of display Power-saving function Peripheral devices/cablesMouse with scroll wheel function Intel processor serial numberProduct name Hardware SpecificationsSpecifications of PC unit Point LAN adapter specifications Sound specificationsGraphical specifications Connector specificationsTXC+ LAN connector 100BASE-TX/10BASE-T Mouse connector Keyboard connector+DATA Index Burglarproof lockMouse Clicking

6000/SS specifications

The Fujitsu 6000/SS is a robust and versatile mid-range computing platform that has made a mark in the world of enterprise computing. Designed to meet diverse business needs, the 6000/SS combines impressive processing power with advanced technological features, making it suitable for a variety of mission-critical applications.

At the heart of the Fujitsu 6000/SS is its powerful CPU architecture. It employs multiple processors capable of handling high volumes of transactions, which is crucial for businesses requiring continuous availability and high performance. The processor is designed to manage complex workloads efficiently, ensuring that applications run smoothly even under heavy loads.

One of the standout features of the 6000/SS is its scalability. This platform can be easily upgraded as business needs evolve, allowing organizations to add more processing power or storage capacity without significant system overhauls. This flexibility is essential for companies looking to grow or adapt in a fast-paced market.

The Fujitsu 6000/SS also prioritizes reliability and uptime, with redundant components and failover mechanisms that ensure continuous operation. This is particularly important for industries where downtime can lead to significant financial losses. With the 6000/SS, businesses can be assured of a stable and resilient environment.

In terms of storage, the 6000/SS is equipped with advanced storage technologies that enable fast access and data retrieval. This is crucial for businesses that rely on real-time data processing and analytics. The platform supports various storage configurations, allowing organizations to choose the setup that best fits their needs.

Networking capabilities are another highlight of the Fujitsu 6000/SS. With support for advanced networking technologies, it can seamlessly integrate into existing IT infrastructures, facilitating communication and data exchange across different systems and platforms. This connectivity is vital for businesses that operate in an increasingly interconnected world.

In addition to its technical specifications, the 6000/SS is designed with manageability in mind. It includes user-friendly interfaces and tools that simplify system administration tasks, reducing the burden on IT staff and allowing them to focus on strategic initiatives.

Finally, Fujitsu's commitment to sustainability is reflected in the design of the 6000/SS. The platform is energy-efficient, reducing overall power consumption and helping organizations meet their environmental goals.

In summary, the Fujitsu 6000/SS stands out as a powerful, reliable, and scalable solution for enterprises. With its advanced features and technologies, it is well-equipped to support the growing demands of modern businesses, ensuring they remain competitive and agile in their respective markets.
Top Page Image Contents