Fujitsu 6000/SS Have you finished Windows setup?, Install one peripheral device at a time

Page 47

Notes on handling

When installing a peripheral device, note the following.

Whenever possible, use peripheral devices supplied by Fujitsu.

Malfunction or damage caused by the use of a third-party product instead of the Fujitsu device shall not be covered by the warranty.

Before using a peripheral device in a category for which Fujitsu does not supply genuine products, contact the third-party manufacturer to ask whether the device is compatible with the PC.

Have you finished Windows setup?

Installing a peripheral device on the PC before setup may cause the setup program to fail. Set up Windows by referring to the Software Guide.

Install one peripheral device at a time.

Installing more than one peripheral devices at a time may cause driver installation to fail.

Turn off the PC and connected devices.

For safety, be sure to unplug the PC and connected devices. Even if the PC is turned off, an electric current flows in the PC unit.

Do not start work immediately after turning off the power.

Components inside the PC may be still hot. After turning off the power and unplugging the PC, wait for about 10 minutes before starting work.

Do not disassemble the power supply unit.

The power supply unit is a box-shaped component on the back inside the PC.

After removing the feet, place the PC unit on a soft cloth.

Placing the PC directly on a hard surface may cause scratches on the PC.

Be careful with the cables and components inside. Do not damage or modify them.

Be careful of static electricity.

PC boards and electronic parts of internal peripheral devices are exposed. They may be damaged by static electricity generated on your body. Before handling these parts, touch a large metallic object to discharge static electricity.

Do not touch PC board surface, soldered parts or connectors. Hold PC boards by the brackets or edges.

Power supply for peripheral devices

Typical peripheral devices should be turned on before turning on the PC, however, some should be turned on after the PC.

Use ACPI-compatible devices. (Windows 98/2000/Me)

Since the PC is controlled as per ACPI (one of the power supply control standards for power saving), peripheral devices must also conform to the ACPI standard.

The use of a peripheral device not conforming to the ACPI standard may cause malfunction of the PC or device. Contact the device manufacturer to ask if your device supports ACPI.

Use an appropriate screwdriver.

You must use a Phillips screwdriver to remove slot covers and brackets from the PC. Use a screwdriver of an appropriate size not to damage screw heads.

37

Image 47
Contents Deskpower 6000/SS Series User’s Manual Important Safety Instructions Iii For Safe Operations Safety product applicationsBefore Starting Your PC Point Conventions used in this manualIllustrations Command entry from keyboardCD-ROM drive\setup.exe Sample screens Diskcopy a aVii Introduction Manual configurationContents Security of the Case Other Precautions Installing Expansion CardsProblems Maintenance of the HardwareChapter Front of the PC unit Part Names and FunctionsVolume Power switchPower lamp Hard disk access lampBack of the PC unit DVI connector Keyboard connector Connect the keyboard Serial connectorParallel connector CRT connectorInside the PC unit Power supply unit Internal hard diskDimm slots Internal batteryFloppy connector FDD MotherboardKeyboard Alt key Caps Lock/Alphanumeric keyCtrl control key Windows keyMoving the mouse Using the mouseUsing the mouse buttons MouseScrolling Double-clickingPointing DraggingMounting the feet InstallationInstallation area Vertical placementMount one of the feet on the PC unit Mount the feet on the PC unitSingle foot Disassemble the feetPlace the PC unit on the disassembled feet Horizontal placementHorizontal placement Example of installationConnection Connect the power cable to the display Connect the power cable to the outletConnect the LAN cable to the network Connect the mouseConnect the keyboard Connect the LAN cablePage Connecting the power cable Page Turning On the Power Press the power switch on the PC Turning on the powerPress the power switch on the display Turning off the power Turning Off the PowerFor Windows For Windows NTPower is automatically turned off. The PC is reset Resetting the PC ResettingClick the Restart button, then click OK CD-ROM Pull the tray with hands Inserting or removing a CDInserting a CD Press the Eject buttonRemoving the CD Inserting a floppy disk Floppy DiskInserting or removing a floppy disk Point Press the floppy disk eject button Confirm that the floppy disk access lamp is offRemoving the floppy disk Hard Disk Hardware What are peripheral devices? Before Installing a Peripheral DeviceDo not disassemble the power supply unit Have you finished Windows setup?Install one peripheral device at a time Do not start work immediately after turning off the powerRemoving the upper cover Removing the CoverIncreasing the Memory Capacity Memory module combinations Location of memory modulesApplicable memory modules Pull the hooks on both sides of the slot outward Installing memory modulesInsert a memory module into the slot Reinstall the reinforcement bracketInstall the expansion card mounting bracket Reinstall the upper cover Installing Expansion Cards Applicable expansion cards Location of expansion cardsInsert the expansion card into the slot Installing an expansion cardRemove the slot cover For Windows NT model Turn on the PC For Windows 95/98/2000/Me modelTroubleshooting Problems Mouse cursor does not move PC cannot be turned on or the power lamp does not light upCharacters entered using the keyboard are not displayed Data cannot be read from the CD-ROM driveNetwork connection cannot be established Technical Information Maintenance of CDs Maintenance of the HardwareMaintenance of the PC unit Maintenance of the keyboardRemove the mouse bottom cover Maintenance of the mouseRemove the ball and clean with water Clean inside the mouseWindows 98/Me/2000/NT models Cleaning of the floppy disk driveEngage a lock you prepared with the mounting bracket Security of the CasePreventing Television or Radio Interference Other PrecautionsPrecautions on PC Precautions on television/radioUSB keyboard Windows 98 model Precautions on using displayPrecautions on using analog LCD Adjustment of analog display screen positionReplacement of display Intel processor serial number Power-saving functionPeripheral devices/cables Mouse with scroll wheel functionProduct name Hardware SpecificationsSpecifications of PC unit Sound specifications Point LAN adapter specificationsConnector specifications Graphical specificationsTXC+ LAN connector 100BASE-TX/10BASE-T Keyboard connector Mouse connector+DATA Burglarproof lock IndexMouse Clicking

6000/SS specifications

The Fujitsu 6000/SS is a robust and versatile mid-range computing platform that has made a mark in the world of enterprise computing. Designed to meet diverse business needs, the 6000/SS combines impressive processing power with advanced technological features, making it suitable for a variety of mission-critical applications.

At the heart of the Fujitsu 6000/SS is its powerful CPU architecture. It employs multiple processors capable of handling high volumes of transactions, which is crucial for businesses requiring continuous availability and high performance. The processor is designed to manage complex workloads efficiently, ensuring that applications run smoothly even under heavy loads.

One of the standout features of the 6000/SS is its scalability. This platform can be easily upgraded as business needs evolve, allowing organizations to add more processing power or storage capacity without significant system overhauls. This flexibility is essential for companies looking to grow or adapt in a fast-paced market.

The Fujitsu 6000/SS also prioritizes reliability and uptime, with redundant components and failover mechanisms that ensure continuous operation. This is particularly important for industries where downtime can lead to significant financial losses. With the 6000/SS, businesses can be assured of a stable and resilient environment.

In terms of storage, the 6000/SS is equipped with advanced storage technologies that enable fast access and data retrieval. This is crucial for businesses that rely on real-time data processing and analytics. The platform supports various storage configurations, allowing organizations to choose the setup that best fits their needs.

Networking capabilities are another highlight of the Fujitsu 6000/SS. With support for advanced networking technologies, it can seamlessly integrate into existing IT infrastructures, facilitating communication and data exchange across different systems and platforms. This connectivity is vital for businesses that operate in an increasingly interconnected world.

In addition to its technical specifications, the 6000/SS is designed with manageability in mind. It includes user-friendly interfaces and tools that simplify system administration tasks, reducing the burden on IT staff and allowing them to focus on strategic initiatives.

Finally, Fujitsu's commitment to sustainability is reflected in the design of the 6000/SS. The platform is energy-efficient, reducing overall power consumption and helping organizations meet their environmental goals.

In summary, the Fujitsu 6000/SS stands out as a powerful, reliable, and scalable solution for enterprises. With its advanced features and technologies, it is well-equipped to support the growing demands of modern businesses, ensuring they remain competitive and agile in their respective markets.