IBM 09-0572-000 manual Changing the Test Setup, File Options

Page 63

7-8 CHAPTER 7: TROUBLESHOOTING

Changing the Test Setup

If you want to change the test parameters, follow these steps:

1Choose the <Test Setup> command button in the Run Tests dialog box shown in Figure 7-4.

The Test Setup dialog box appears, as shown in Figure 7-5.

Diagnostic and Manual Configuration Program

Quit Install Test View Select

Test Setup

F1=Help

Group Select

Group 1

Group 2

Repetitions

(.) [1 ]Times

Continuous

Errors

[X] Halt on Error

 

Group 1 Tests

 

 

 

MMIO Register Write/Read Test

 

 

*Enabled

AIP Checksum Test

 

 

*Enabled

Shared RAM Boundary/Domain Test

 

*Enabled

Shared RAM Write/Read Test

 

 

*Enabled

Timer Test

 

 

 

*Enabled

Open Adapter for Ring Operation Test

*Enabled

Ring Operations Test

 

 

*Enabled

Close Adapter Test

 

 

*Enabled

Defaults

Enable Group

 

Disable Group

File Options...

OK

 

Cancel

[−↓]=Select a Test Group to View [Alt]+<Highlighted Key>=Execute Function

[TAB]=Next Field [SHIFT+TAB]=Previous Field [F1]=Help [ESC]=<Cancel>

Figure 7-5 Test Setup Dialog Box

2Press [Tab] to move from field to field and highlight any field within the Test Setup dialog box.

Within the Group Select area, use the arrow keys to highlight Group 1 or Group 2. Use the <Enable Group> or <Disable Group> command buttons to enable or disable a group of tests.

For a description of these tests, refer to the on-line help in the diagnostic program.

3When you are satisfied with the new test setup, highlight the <OK> command button and press [Enter].

4To run the tests, choose Run Tests from the Test menu and select the <Start> button.

Image 63
Contents Member of the TokenLink III product family ISA Adapter User GuideLifetime Warranty Asia 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Installing the Network Driver for Windows Troubleshooting Using the Configuration and Diagnostic Program Page Figures Tables 3Com Mode versus IBM ModeHow to Use This Guide About this GuideIntroduction Conventions InstallIntroduction TokenLink III 16/4 ISA Token Ring Adapter FeaturesAutoLink Installation Installation and Configuration OptionsAdapter Installation and Configuration Transcend PC Link SmartAgent Software TroubleshootingStandard Installation and Configuration Windows Installation and ConfigurationMoney-Back Guarantee Adapter Installing the 3C619C3C619C Adapter Installation PC Requirements Inspecting the Adapter Taking Safety PrecautionsCheck the adapter for any visible signs of damage Installing the AdapterRemoving the Backplate Connecting to the Network Shielded twisted-pair STP cable DB-9RJ-45 Locate the DB-9 connector on the shielded twisted-pair cable Connecting to Shielded Twisted-pair STP CableConnecting to Unshielded Twisted-pair UTP Cable Feature for NET Ware Using the Auto LinkAutoLink Options AutoLink RequirementsAvoiding Memory Manager Conflicts Make a backup copy of the CONFIG.SYS file. TypeUsing the AutoLink Feature Follow these steps to use the AutoLink featureType at the prompt Configuration Standard InstallationAuto Configuring the 3C619C Adapter in an ISA PC Configuration RequirementsI N N U IRQ = 2,3,6, or IBM Changing Software Option SettingsTo change the software option settings, follow these steps Adapter Configuration Screen Video Conflicts with BIOS/MMIO and Shared RAM Addresses Changing Settings for Multiple AdaptersChanging Software Option Settings Drivers Installing NetworkDEC PATHWORKS Installing the Novell NetWare DriverMain Menu with Network Drivers Option Selected Updating the PC Startup Files Installing the OS/2 Network Driver for NetWare Installing the Server Driver for NetWareNetWare Systems with Multiple Adapters Installing the Ndis 2.01 Driver Build a PROTOCOL.INI file in the Lanman subdirectory IBM mode Ndis Systems with Multiple AdaptersSample PROTOCOL.INI File Using IBM Drivers Updating the Current Ndis DriverObtaining IBM Network Drivers Before Using RPL Using Remote Program Load RPLEnabling RPL 3TOKDIAG Enter Click the Continue button Installing the NetworkInstalling the Network Driver for Windows NT Driver for WindowsInstalling the Network Driver for Windows \WIN95 Adapter LEDs TroubleshootingUsing the TokenDisk Diskette Diagnostic Program Depicts how to use the TokenDisk diskette diagnostic program Group 1 Diagnostics Diagnostic Test TypesDiagnostic Test Types Running the Diagnostic Tests Group 2 DiagnosticTest Menu File Options Changing the Test SetupWhen Tests Fail Adapter Statistics and InformationAdapter Statistics Adapter Information When Tests FailShared RAM Boundary/Domain Test Failure Boot Prom Test FailureMmio Register Write/Read Test Failure AIP Checksum Test FailureRing Operations Test Failure Timer Test FailureShared RAM Write/Read Test Failure Open Adapter for Ring Operation Test FailureInspect all cables and connections Troubleshooting TipsClose Adapter Test Failure Adapter Wrap Test Failure GroupRefer to Appendix B, Specifications Technical Support Error MessagesAdditional Information On-line InformationFigure A-1 Menu Hierarchy Using Configuration Diagnostic ProgramSpeed Keys Using the KeyboardChoosing a Menu Item Using the MouseUsing the File Options HelpLoad loads a file from a selected directory Using the Command Line Exiting the ProgramDOS prompt such as A\ type Cabling Pin Assignments Configuration Options SpecificationsCabling Pin AssignmentsFigure B-1 DB-9 Connector Pin Assignments Configuration Options Configuration ModeBase Address Ring SpeedShared RAM Page Size and Address Range BIOS/MMIO Address LocationKB / CE000-CFFFF Interrupt Request LevelOther Configuration Options Messages Error MessagesAppendix C Error Messages Messages C-3 Appendix C Error Messages Messages C-5 On-line Technical Services 3Com Bulletin Board ServiceTechnical Support To use Ask3Com Log on to CompuServe 3ComFacts Automated Fax ServiceWorld Wide Web Site Ask3Com on CompuServeDetails about recent configuration changes, if applicable Support from Your Network SupplierTo obtain an RMA number, call or fax Returning Products for RepairControlled access unit Configuration Dual access unit DriverGlossary Multistation access unit Industry Standard ArchitectureLobe Token ring Protocol layersTSR Numerics IndexNdis View A-3 RPL Limited Warranty FCC Class a Verification Statement

09-0572-000 specifications

The IBM 09-0572-000 is a notable component within IBM's broad range of technology solutions, particularly recognized for its integration in enterprise-level systems. This model is primarily distinguished as a power supply unit designed for IBM's well-established line of servers and storage solutions.

One of the key features of the IBM 09-0572-000 is its reliability under heavy workloads. This power supply is engineered to provide a stable power source, ensuring that systems remain operational during critical processes. It boasts robust protection mechanisms, including overvoltage, undervoltage, and overcurrent protection. These features are essential for safeguarding sensitive components in server environments, where power fluctuations could lead to data loss or hardware failure.

Moreover, the IBM 09-0572-000 supports hot-swapping capabilities, allowing IT administrators to replace the power supply without shutting down the system. This feature significantly enhances system availability and reduces downtime, which is crucial for businesses that rely on 24/7 operations.

In terms of performance, the power supply is designed to meet high-efficiency standards, with many models featuring an energy efficiency rating that complies with the 80 PLUS certification. This designation indicates that the power supply operates efficiently under various loads, translating into lower operational costs and reduced energy consumption for businesses.

The IBM 09-0572-000 is also compatible with multiple server configurations, showcasing its versatility within various IBM enterprise environments. This adaptability makes it an ideal choice not just for current models but also for legacy systems, highlighting its longevity in the tech lifecycle.

With a compact design, this power supply enables optimal space utilization within server racks. It exhibits a well-thought-out construction providing excellent thermal management, which is vital in preventing overheating in densely packed data centers.

Ultimately, the IBM 09-0572-000 epitomizes the combination of reliability, efficiency, and versatility that IBM products are known for. Its advanced protective features, compatibility with a range of systems, and innovative design make it a critical component for ensuring optimal performance and uptime in enterprise IT environments. Whether for small businesses or large-scale operations, the 09-0572-000 continues to be a staple in maintaining the heart of robust IT infrastructures.