IBM IBM UPS 10000XHV, IBM UPS 7500XHV setup guide Attach the mounting brackets

Page 10

2.Switch the uninterruptible power supply input circuit breaker (see A in the diagram that follows) and the utility circuit breakers off.

3.Remove the access panel (see B in the diagram).

4.Remove the circular knockouts on the access panel.

5.Run wires through the access panel to the terminal blocks. Connect the wire to the ground block first. Adhere to all national and local electrical codes. (See tables and diagram.)

6.Use appropriate cable fitting to achieve strain-relief on the hardwired input and output power cables.

7.For three-phase input, set the Input Phase Selector switch (see C in the diagram) to ‘3’. For single-phase input, leave the switch in the default position of ‘1’.

8.Switch the circuit breakers on.

9.Check the line voltages.

10.Replace the access panel.

Mounting the Uninterruptible Power Supply in a Rack and Attaching the Front Bezel

! Attach the mounting brackets.

" Install the rails per the rail installation diagram in the Rail

 

Kit. Referencing the chart below, install the cage nuts (or clip

 

nuts). The solid squares indicate the cage nut or clip nut loca-

 

tion. Mount the uninterruptible power supply at the bottom of

 

the rack.

 

Note: Leave 3 U of space below the uninterruptible power

 

supply for each battery pack that you plan to install.

6

Image 10
Contents IBM UPS 7500XHV IBM UPS 10000XHV Page Table of Contents Page Safety Page 18 kg 40 lb Kg 70-120 lb Kg 40-70 lb 55 kg 120 lb 10º Introduction Removing the Battery ModulesUnpacking Positioning the Uninterruptible Power Supply Hardwiring the Uninterruptible Power SupplyAttach the mounting brackets # Secure the uninterruptible power supply in the rack Tower Configuration Startup Index DescriptionSelecting the Output Voltage via Terminal Mode Mode. See Troubleshooting Front Display PanelDetermining On Battery Runtime On Battery OperationBattery Runtime Tables UPS 7500XHV Model User Configurable Items Emergency Power Off EPO Option EPOStorage Replacing the Battery ModulesShipping and Service Replacing the Network Management CardHardware Maintenance Information Customer Replaceable Unit Part NumbersTroubleshooting Alarm Tone Before you call Replacement part handling Page Edition Notice Argentina Iram certification requirement

IBM UPS 7500XHV, IBM UPS 10000XHV specifications

IBM has always been at the forefront of technological advancements, and its line of uninterruptible power supplies (UPS) is no exception. Two noteworthy models in their UPS range are the IBM UPS 10000XHV and the IBM UPS 7500XHV. Both models are designed to provide reliable power protection for critical IT infrastructure, ensuring continuous operation even during power disturbances.

The IBM UPS 10000XHV is engineered for high-capacity applications, offering a robust power output of 10,000 VA. This model is particularly well-suited for data centers and enterprise environments that require dependable power support. One of the standout features of the 10000XHV is its advanced double-conversion technology. This technology ensures a consistent output voltage and frequency, effectively isolating connected equipment from any external power fluctuations. With an impressive battery runtime, this UPS allows organizations to maintain operational continuity, giving time for systems to transition to backup power sources or to shut down gracefully.

In addition to its impressive power output, the UPS 10000XHV incorporates real-time monitoring and management capabilities via its integrated LCD display. This feature allows users to easily track the UPS's performance metrics, battery status, and load levels, facilitating proactive maintenance and management. Furthermore, the UPS is designed with hot-swappable batteries, enabling replacement without interrupting the operation of connected devices.

On the other hand, the IBM UPS 7500XHV offers a slightly lower capacity at 7,500 VA, making it an ideal choice for moderately sized environments or less demanding applications. This model also leverages the same double-conversion technology, ensuring protection against power disruptions. The 7500XHV boasts an efficient design that minimizes energy consumption, a crucial factor for organizations looking to reduce operational costs while maintaining performance reliability.

Both models feature a range of connectivity options that facilitate seamless integration into various network environments. They support multiple communication protocols, enabling users to configure and manage UPS operations remotely through a centralized management system. In terms of safety, IBM has equipped these UPS units with advanced battery management technologies to extend battery life and optimize performance.

In conclusion, the IBM UPS 10000XHV and 7500XHV represent cutting-edge solutions for organizations seeking dependable power protection. With their advanced features and technologies, these UPS units are essential for safeguarding critical infrastructure against the unpredictable nature of power fluctuations, ultimately ensuring operational resilience in today’s digital landscape.