Fujitsu D1241 manual Performance

Page 14

P2. erfFEA ormanceTURES

2.FEATURES

2.1.3Performance

UltraPerformance: Onboard Ultra160/Ultra2 (depending on model) dual chan- nel SCSI controller with two connectors that support 30 Ultra160/Ultra2 SCSI devices in two channels.

Dual Speeds: CPU frequency can operate at either 133MHz or 100MHz de- pending on the CPU installed.

High-Speed Data Transfer Interface: SCSI transfers using Ultra160/Ultra2 (depending on model) dual channel SCSI controller can handle rates up to 160MB/ s or 80MB/s. Ultra160/Ultra2 is backward compatible with slower SCSI de- vices so that older SCSI devices are not wasted. (Ultra160/Ultra2 SCSI cables have twisted pairs compared to flat ribbon cables used in older SCSI standards.)

Advanced 64-bit PCI: Maximizes IO bandwidth for the next generation of 64- bit PCI cards, supports up to (2) full 64-bit 66/33MHz PCI busses, and supports up to (5) 32-bit 33MHz PCI busses.

Full Peer-to-Peer Support: Allows full peer-to-peer transactions between PCI busses and increases options for intelligent IO and Server Management cards.

SDRAM Optimized Performance: This motherboard supports PC133 “regis- tered” Synchronous Dynamic Random Access Memory (SDRAM), which increases the data transfer rate to 1064MB/s max

ACPI Ready: ACPI (Advanced Configuration and Power Interface) is also imple- mented on all smart series motherboards ???. ACPI provides more Energy Saving Features for future operating systems (OS) supporting OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards. To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows 98, must be used.

New Compliancy: Both the BIOS and hardware levels of the motherboard meet the stringent requirements for SDG2.0 certification. The new SDG2.0 require- ments for systems and components are based on the following high-level goals: support for Plug and Play compatibility and power management for configuring and managing all system components, and 32-bit device drivers and installation procedures for Windows NT/2000. Color-coded connectors and descriptive icons make identification easy as required by PC 99.

10

User’s Manual

Image 14
Contents Page Page Page A26361-D1241-Z120-1-7619 Page %!.-*!.+,/#/$%&&&1 Page Contents User’s Manual FCC & DOC Compliance Intructions on setting up the Bios Item ChecklistManual information and checklist How This Manual Is OrganizedLatest Intel Processor Support SpecificationsMotherboard Scsi Type PCI1-4Specifications-Optional Components PCI/ISA Expansion SlotsPerformance Intelligence Motherboard Components See opposite page for locationsComponent Locations Hardware Setup Hardware Setup Layout ContentsHardware Setup Procedure Motherboard SettingsSdram Configurations System Memory DimmDimm Installation CUR-DLS 168-Pin Dimm SocketsCentral Processing Unit CPU CPUExpansion Card Installation Procedure Expansion CardsAssigning IRQs for Expansion Cards ISA Interrupt IRQ AssignmentsPS/2 Keyboard Connector Purple 6-pin PS2KBMS ConnectorsPS/2 Mouse Connector Green 6-pin PS2KBMS Serial Port Connectors Teal/Turquoise 9-pin COM1/COM2 Fast-Ethernet Port Connector RJ45 optionalParallel Port Connector Burgundy 25-pin Printer Monitor Output Connector Blue 15-pin VGA USB Header 10-1 pin UsbportFloppy Disk Drive Connector 34-1 pin Floppy Primary Blue / Secondary IDE Connectors 40-1 pin IDE1/IDE2 Wake-On-LAN Connector 3-pin Wolcon Wake-On-Ring Connector 2-pin WORCPU and Chassis Fan Connectors 3-pin CPUFAN1/2, CHAFAN1/2 Status LED 2-pin SMBus Connector 5-1 pin SMBNIC Activity LED 2-pin System Management Interrupt Lead 2-pinSystem Power LED Lead 3-1 pin ATX Power Switch / Soft-Off Switch Lead 2-pinReset Switch Lead 2-pin System Warning Speaker Connector 4-pinATX Power Supply Connector 20-pin block Atxpwr Two 68-pin Ultra160/Ultra2 Scsi ConnectorsScsi Connection Notes Starting Up the First Time Beep MeaningPowering Up Managing and Updating Your Bios Upon First Use of the Computer SystemUpdating Bios Procedures Bios Setup Follow the onscreen instructions to continue Bios Setup Program Bios Menu Bar Navigation Keys Function DescriptionGeneral Help System Time Floppy 3 Mode Support DisabledMain Menu System Date XX/XX/XXXXType Auto None to disable IDE devicesPrimary & Secondary Master/Slave Cylinders User Type HDDTranslation Method LBA Ultra DMA Mode Disabled Smart Monitoring DisabledPIO Mode HeadKeyboard Auto-Repeat Delay 1/4 Sec Keyboard FeaturesBoot Up NumLock Status On Other options for Type areHalt On All Errors Supervisor Password Disabled / User Password DisabledForgot the Password? Installed Memory XXX MBProcessor Serial Number Disabled CPU Level 1 Cache, CPU Level 2 Cache EnabledCPU Level 2 Cache ECC Check Disabled Bios Update EnabledOS/2 Onboard Memory 64M Disabled PS/2 Mouse Function Control AutoMemory Hole At 15M-16M Disabled Chip ConfigurationVideo Memory Cache Mode UC High Priority PCI Mode EnabledUART2 Use Standard Infrared Disabled 2 I/O Device ConfigurationFloppy Disk Access Control R/W Onboard FDC Swap a & B No SwapECP DMA Select Parallel Port Mode ECP+EPPOnboard Parallel Port 378H/IRQ7 PCI Latency Timer PCI ConfigurationPCI/VGA Palette Snoop Disabled Onboard Scsi Bios AutoUSB Function Enabled ONB Scsi Bios First NoONB Primary Scsi Term, ONB Secondary Scsi Term Enabled ONB VGA Bios First NoC8000-DFFFF Shadow Disabled Shadow ConfigurationVideo ROM Bios Shadow Enabled Power Menu Power Management User DefineVideo Off Method Dpms OFF HDD Power Down DisabledVideo Off Option Suspend Off PWR Up On Modem Act Enabled Power Up ControlAC PWR Loss Restart Disabled Wake On LAN DisabledAutomatic Power Up Disabled Hardware Monitor Other Boot Device Select INT18 Device Network Boot MenuBoot Device Removable Device Legacy FloppyBoot Up Floppy Seek Disabled MPS 1.4 Support EnabledQuick Power On Self Test Enabled Full Screen Logo EnabledExit Menu Exit Saving ChangesLoad Setup Defaults Glossary Bus Master IDE BootDram Dynamic Random Access Memory Byte Binary TermLPT Port Line Printer Port Plug and Play BiosPost Power On Self Test OnNowSdram Synchronous Dram ROM Read Only MemoryScsi Small Computer System Interface SPD for Sdram moduleInformation on this document Hinweise zum vorliegenden Dokument

D1241 specifications

The Fujitsu D1241 is a high-performance server motherboard designed to cater to the demands of various applications, particularly in enterprise environments. It supports advanced computing requirements while providing flexibility and reliability that organizations require to thrive in a competitive landscape.

One of the standout features of the Fujitsu D1241 is its support for the latest Intel Xeon processors. This enables the motherboard to deliver exceptional processing power, making it suitable for data-intensive workloads such as virtualization, database management, or high-performance computing. With multiple CPU configurations, organizations can easily scale their performance needs based on their workloads.

The D1241 is equipped with robust memory support, allowing it to handle up to 1TB of DDR4 ECC RAM across its DIMM slots. This capability is crucial for mission-critical applications where data integrity and reliability are paramount. The use of Error-Correcting Code (ECC) technology helps identify and correct memory errors automatically, thereby minimizing system downtime and enhancing overall system stability.

In terms of connectivity, the Fujitsu D1241 features multiple PCIe slots that enable organizations to incorporate additional components, such as GPUs, RAID controllers, or network interface cards. This expandability ensures that businesses can customize their systems to meet their specific requirements. Furthermore, it includes multiple SATA and NVMe ports, which allow for fast storage solutions, enhancing data retrieval and processing speeds.

Security is another critical aspect of the Fujitsu D1241. The motherboard is designed with advanced security features, including firmware and hardware-based security measures, to protect sensitive data against unauthorized access. This capability is essential for businesses that handle confidential information and need to comply with industry regulations.

Cooling and power efficiency are also prioritized in the design of the D1241. The motherboard supports advanced thermal management technologies, ensuring optimal system performance even under heavy loads. Combined with a power-efficient design, the D1241 helps organizations reduce energy costs while maintaining performance.

Overall, the Fujitsu D1241 stands out as a versatile and robust motherboard, combining cutting-edge technology, expandability, and reliability. Its enterprise-grade features make it a preferred choice for businesses looking to invest in a dependable server platform that can adapt to evolving technological demands. With its rich feature set, the D1241 proves to be an excellent foundation for a wide range of applications.