Fujitsu D1241 manual Hardware Setup Procedure, Motherboard Settings

Page 20

Motherboard Settings

3. H/W SETUP

3.HARDWARE SETUP

3.3Hardware Setup Procedure

Before using your computer, you must complete the following steps:

Check Motherboard Settings

Install Memory Modules

Install the Central Processing Unit (CPU)

Install Expansion Cards

Connect Ribbon Cables, Panel Wires, and Power Supply

3.4Motherboard Settings

WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electric- ity, you should follow some precautions whenever you work on your computer.

1.Unplug your computer when working on the inside.

2.Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.

3.Hold components by the edges and try not to touch the IC chips, leads or con- nectors, or other components.

4.Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system.

5.Ensure that the ATX power supply is switched off before you plug in or remove the ATX power connector on the motherboard.

16

User’s Manual

Image 20
Contents Page Page Page A26361-D1241-Z120-1-7619 Page %!.-*!.+,/#/$%&&&1 Page Contents User’s Manual FCC & DOC Compliance Item Checklist Manual information and checklistIntructions on setting up the Bios How This Manual Is OrganizedSpecifications MotherboardLatest Intel Processor Support Scsi Type PCI1-4Specifications-Optional Components PCI/ISA Expansion SlotsPerformance Intelligence Motherboard Components See opposite page for locationsComponent Locations Hardware Setup Hardware Setup Layout ContentsHardware Setup Procedure Motherboard SettingsSdram Configurations System Memory DimmDimm Installation CUR-DLS 168-Pin Dimm SocketsCentral Processing Unit CPU CPUExpansion Card Installation Procedure Expansion CardsAssigning IRQs for Expansion Cards ISA Interrupt IRQ AssignmentsPS/2 Keyboard Connector Purple 6-pin PS2KBMS ConnectorsPS/2 Mouse Connector Green 6-pin PS2KBMS Serial Port Connectors Teal/Turquoise 9-pin COM1/COM2 Fast-Ethernet Port Connector RJ45 optionalParallel Port Connector Burgundy 25-pin Printer Monitor Output Connector Blue 15-pin VGA USB Header 10-1 pin UsbportFloppy Disk Drive Connector 34-1 pin Floppy Primary Blue / Secondary IDE Connectors 40-1 pin IDE1/IDE2 Wake-On-LAN Connector 3-pin Wolcon Wake-On-Ring Connector 2-pin WORCPU and Chassis Fan Connectors 3-pin CPUFAN1/2, CHAFAN1/2 SMBus Connector 5-1 pin SMB NIC Activity LED 2-pinStatus LED 2-pin System Management Interrupt Lead 2-pinATX Power Switch / Soft-Off Switch Lead 2-pin Reset Switch Lead 2-pinSystem Power LED Lead 3-1 pin System Warning Speaker Connector 4-pinATX Power Supply Connector 20-pin block Atxpwr Two 68-pin Ultra160/Ultra2 Scsi ConnectorsScsi Connection Notes Starting Up the First Time Beep MeaningPowering Up Managing and Updating Your Bios Upon First Use of the Computer SystemUpdating Bios Procedures Bios Setup Follow the onscreen instructions to continue Bios Setup Program Bios Menu Bar Navigation Keys Function DescriptionGeneral Help Floppy 3 Mode Support Disabled Main MenuSystem Time System Date XX/XX/XXXXType Auto None to disable IDE devicesPrimary & Secondary Master/Slave Cylinders User Type HDDTranslation Method LBA Smart Monitoring Disabled PIO ModeUltra DMA Mode Disabled HeadKeyboard Features Boot Up NumLock Status OnKeyboard Auto-Repeat Delay 1/4 Sec Other options for Type areSupervisor Password Disabled / User Password Disabled Forgot the Password?Halt On All Errors Installed Memory XXX MBCPU Level 1 Cache, CPU Level 2 Cache Enabled CPU Level 2 Cache ECC Check DisabledProcessor Serial Number Disabled Bios Update EnabledOS/2 Onboard Memory 64M Disabled PS/2 Mouse Function Control AutoChip Configuration Video Memory Cache Mode UCMemory Hole At 15M-16M Disabled High Priority PCI Mode Enabled2 I/O Device Configuration Floppy Disk Access Control R/WUART2 Use Standard Infrared Disabled Onboard FDC Swap a & B No SwapECP DMA Select Parallel Port Mode ECP+EPPOnboard Parallel Port 378H/IRQ7 PCI Configuration PCI/VGA Palette Snoop DisabledPCI Latency Timer Onboard Scsi Bios AutoONB Scsi Bios First No ONB Primary Scsi Term, ONB Secondary Scsi Term EnabledUSB Function Enabled ONB VGA Bios First NoC8000-DFFFF Shadow Disabled Shadow ConfigurationVideo ROM Bios Shadow Enabled Power Menu Power Management User DefineVideo Off Method Dpms OFF HDD Power Down DisabledVideo Off Option Suspend Off Power Up Control AC PWR Loss Restart DisabledPWR Up On Modem Act Enabled Wake On LAN DisabledAutomatic Power Up Disabled Hardware Monitor Boot Menu Boot DeviceOther Boot Device Select INT18 Device Network Removable Device Legacy FloppyMPS 1.4 Support Enabled Quick Power On Self Test EnabledBoot Up Floppy Seek Disabled Full Screen Logo EnabledExit Menu Exit Saving ChangesLoad Setup Defaults Glossary Boot Dram Dynamic Random Access MemoryBus Master IDE Byte Binary TermPlug and Play Bios Post Power On Self TestLPT Port Line Printer Port OnNowROM Read Only Memory Scsi Small Computer System InterfaceSdram Synchronous Dram SPD for Sdram moduleInformation on this document Hinweise zum vorliegenden Dokument

D1241 specifications

The Fujitsu D1241 is a high-performance server motherboard designed to cater to the demands of various applications, particularly in enterprise environments. It supports advanced computing requirements while providing flexibility and reliability that organizations require to thrive in a competitive landscape.

One of the standout features of the Fujitsu D1241 is its support for the latest Intel Xeon processors. This enables the motherboard to deliver exceptional processing power, making it suitable for data-intensive workloads such as virtualization, database management, or high-performance computing. With multiple CPU configurations, organizations can easily scale their performance needs based on their workloads.

The D1241 is equipped with robust memory support, allowing it to handle up to 1TB of DDR4 ECC RAM across its DIMM slots. This capability is crucial for mission-critical applications where data integrity and reliability are paramount. The use of Error-Correcting Code (ECC) technology helps identify and correct memory errors automatically, thereby minimizing system downtime and enhancing overall system stability.

In terms of connectivity, the Fujitsu D1241 features multiple PCIe slots that enable organizations to incorporate additional components, such as GPUs, RAID controllers, or network interface cards. This expandability ensures that businesses can customize their systems to meet their specific requirements. Furthermore, it includes multiple SATA and NVMe ports, which allow for fast storage solutions, enhancing data retrieval and processing speeds.

Security is another critical aspect of the Fujitsu D1241. The motherboard is designed with advanced security features, including firmware and hardware-based security measures, to protect sensitive data against unauthorized access. This capability is essential for businesses that handle confidential information and need to comply with industry regulations.

Cooling and power efficiency are also prioritized in the design of the D1241. The motherboard supports advanced thermal management technologies, ensuring optimal system performance even under heavy loads. Combined with a power-efficient design, the D1241 helps organizations reduce energy costs while maintaining performance.

Overall, the Fujitsu D1241 stands out as a versatile and robust motherboard, combining cutting-edge technology, expandability, and reliability. Its enterprise-grade features make it a preferred choice for businesses looking to invest in a dependable server platform that can adapt to evolving technological demands. With its rich feature set, the D1241 proves to be an excellent foundation for a wide range of applications.