Hardware Setup
CD-In Connector: JCD1
The connector is for
L
GND
R
JCD1
Front Panel Connectors: JFP1 / JFP2
The mainboard provides two front panel connectors for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel® Front Panel I/O Connec- tivity Design Guide.
Reset | HDD |
|
| Pin Definition | |
PIN | SIGNAL | DESCRIPTION | |||
Switch LED | |||||
|
|
| |||
|
| 1 | HD_LED_P | Hard disk LED | |
9 | 1 | 2 | FPPWR/SLP | MSG LED | |
10 | 2 | 3 | HD_LED_N | Hard disk active LED | |
Power |
| 4 | FPPWR/SLP | MSG LED | |
Power | 5 | RST_SW_N | Reset Switch low reference | ||
Switch | LED | 6 | PWR_SW_P | Power Switch high reference | |
JFP1 | 7 | RST_SW_P | Reset Switch high reference | ||
|
| 8 | PWR_SW_N | Power Switch low reference | |
|
| 9 | RSVD_DNU | Reserved. Do not use. |
|
|
| Pin Definition |
| ||
Power | 1 | PIN | SIGNAL | PIN | SIGNAL | |
LED | ||||||
|
|
|
| |||
| 2 | 1 | GND | 2 | SPK- | |
|
| |||||
7 |
| 3 | SLED | 4 | BUZ+ | |
8 |
| 5 | PLED | 6 | BUZ- | |
|
| 7 | NC | 8 | SPK+ | |
Speaker |
|
|
|
|
|
JFP2