Chapter 1
¡Use a grounded wrist strap designed to prevent static discharge.
¡Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready for use.
¡Touch a grounded metal object before removing the board from the antistatic bag.
¡Do not let components or PCBs come into contact with your clothing, which may retain a charge even if you are wearing a wrist strap.
¡Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or contacts.
¡When handling chips or modules, avoid touching their pins.
¡Put the motherboard and peripherals back into their antistatic bags when not in use.
¡For grounding purposes, make sure your computer chassis provides excellent conductivity between the power supply, the case, the mounting fasteners and the motherboard.
¡After accessing the inside of the system, close the system back up and secure it to the rack unit with the retention screws after ensur- ing that all connections have been made.
Operating Precautions
¡Check package contents
¡Missing or damaging accessories Please contact your vendor immediately
¡Motherboard damage
Please contact your vendor immediately
¡Prepare minimum system components z Intel Xeon @800MHz FSB Processor
z At least one Registered DDR2 memory module z Graphic card with
z At least one SATA or IDE HDD
z EPS12V Power Supply with 460W or above