IBM DJ800 user manual Secure the CPU re Taining lever

H a r d w a r e I n s t a l l a t i o n

D J 8 0 0 M o t h e r b o a r d

Step 5— Lower the locking mechanism’s retaining lever and secure it in place to secure the processor in the socket. Grasp the processor by the edges and gently pull upwards to insure it is properly inserted. The processor shouldn’t move.

Secure the CPU re-

taining lever

Step 6—Apply all of the TIM in the applicator to the center of the square heat spreader plate in the middle of the CPU. Do not spread the TIM around. When you place the heatsink on top of the CPU the material will disperse evenly.

Apply all of the ther- mal interface mate- rial to the center of the processor heater spreader plate

Important

When you only place ONE Intel Xeon processor, please put on the

position of CPU1.

3-4