Fujitsu P3AM-3842-05ENZ0 manual For Veritas Volume

Page 16

Chapter 1 Workflow

>1.2 When the Multipath Driver is Used

Install the Fibre Channel Card Driver

Install the appropriate driver for the Fibre Channel card being used.

Applicable manual varies according to the server, OS, and Fibre Channel Card type being used. Select from the following list.

Refer

-"Chapter 7 Installing and Setting Up the Drivers" (page 28)

-Mount cards, install drivers, and perform setup.

•"Driver Settings for PRIMERGY/PRIMEQUEST 1000 Series"

-Mount cards, install drivers, and perform setup.

•"Driver Settings for PRIMEQUEST 500/400 Series"

-Mount cards, install drivers, and perform setup.

•"Driver Settings for Red Hat Enterprise Linux on Other Brand Servers with Emulex Fibre Channel Cards"

-Mount cards, install drivers, and perform setup.

•"Driver Settings for Red Hat Enterprise Linux on Other Brand Servers with QLogic Fibre Channel Cards"

-Mount cards, install drivers, and perform setup.

•"Driver Settings for SUSE Linux Enterprise Server on Other Brand Server with Emulex Fibre Channel Cards"

-Mount cards, install drivers, and perform setup.

•"Driver Settings for SUSE Linux Enterprise Server on Other Brand Servers with QLogic Fibre Channel Cards"

-Check the Fibre Channel Card driver versions.

•"Server Support Matrix"

For ETERNUS Multipath	For VERITAS Volume	For device-mapper
Driver	Manager	multipath

P3AM-3842-05ENZ0 ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) for Linux

16	Copyright 2010 FUJITSU LIMITED

Image 16

Contents Page Page Preface Contents and Structure of this Manual Acknowledgments Safe Use of this ProductNaming Conventions Sles Other names Contents Chapter Logical Unit Recognition When the Multipath Driver is not Used WorkflowSet Up the Fibre Channel Switch WorkflowInstall the Fibre Channel Card Driver Connect the Server to the Eternus DX Disk Storage SystemsSet the Server to Recognize the Logical Units Create a File SystemWhen the Multipath Driver is Used Usable Multipath DriversInstall and Set Up ETERNUSmgr For Veritas Volume Install Eternus Multipath Driver or GR Setting Up and Checking the Multipath DriverInstall Veritas Volume Set up the device Mapper multipathChecking the Server Environment Server HardwareServer OS Fibre Channel CardsVeritas Volume Manager VxVM Eternus Multipath Driver or GR Multipath DriverDevice-mapper multipath Veritas Cluster ServerConnection Notes Scsi Devices and LinuxServer Startup and Power Supply Control Notes Fibre Channel Switch NotesFibre Channel Card Notes Veritas Volume Manager VxVM Notes Design Sheet NotesVeritas Cluster Server VCS Notes Installing and Setting Up ETERNUSmgr Setting Up the Eternus DX Disk Storage Systems Setting the Fibre Channel Switches Installing and Setting Up the Drivers Connecting the Server to the Eternus DX Disk Storage Systems Logical Unit Recognition Displaying the Recognized Logical UnitsFujitsu For Suse Linux Enterprise Server Setting Up and Checking the Multipath Driver Setting Up the File System Procedure Obtain and apply the Change LUN State Utility Check the volume status