SETTING THE CLOCK
Use the remote control.
1Press CLOCK while pressing SHIFT.
When using the unit, press a while the power is off.
The clock is displayed. (The “:” between the hours and minutes flashes.)
2Within 4 seconds, press for gto designate
the hour and the minute.
Pressing either button changes both the hour and the minute. Holding it down will vary the time rapidly by
3Press a.
The clock starts from 00 seconds.
To restore an original clock setting
Press CLOCK while pressing SHIFT before completing step 3 to restore the previous time setting.This cancels any new setting.
To view the clock when another display is in the display
Press CLOCK while pressing SHIFT. The time is displayed for 4 seconds and then the original display reappears. However, the clock cannot be displayed during recording.
To switch to the 24-hour standard
Press CLOCK while pressing SHIFT and then press s within 4 seconds.
Repeat the same procedure to restore the
In the
If the clock display flashes
If the display flashes when the clock is displayed, it indicates that the clock has stopped due to a power failure or the removal of the power cord. The current time needs to be reset.
If the
SOUND | PREPARATIONS | |
AUDIO ADJUSTMENTS | ||
| ||
| SOUND |
VOLUME |
| |
Turn VOLUME on the main unit, or press VOL on the |
| |
remote control. |
| |
The volume level is displayed as a number from 0 to MAX (31). |
| |
The volume level is automatically set to 16 when the power is |
| |
turned off with the volume level set to 17 or more. |
| |
SUPER |
| |
The |
| |
sound. | En | |
Press | ||
|
Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.
To select with the remote control
Press
Low frequency sound may be distorted when the
ENGLISH 7