AI EDIT RECORDING
The AI edit recording function enables CD recording without worrying about tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the order of tracks is rearranged so that no track is cut short.
(AI: Artificial Intelligence)
6Press w on deck 1 to start recording on the first
side.
CD play and recording of edited tracks for the first side start simultaneously. When the end of the tape is reached, deck 1 enters the recording stop mode. After entering the recording stop mode, go to step 7.
7Press CD EDIT/CHECK while pressing SHIFT on the remote control to display the program for the
second recording.
“B” is displayed.
8Turn over the tape in deck 1 and press wto start recording on the second side.
To stop recording
Press Z on deck 1. Recording and CD play stop simultaneously.
To clear the edit program
Press sCLEAR twice so that “EDIT” disappears on the display.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press f or
grepeatedly.
| Programmed |
Track number | tracks number |
RECORDING
1Insert the tape into deck 1, and wind up to the
beginning of the front side.
Press Z to open the cassette holder and insert the tape with the side to be recorded on first facing out from the unit. Wind up the tape with f.
2Press CD and load the disc(s).
3Press CD EDIT/CHECK once while pressing
SHIFT on the remote control.
“EDIT” and “AI” are displayed.
•When “PRGM” is displayed, press CD EDIT/CHECK while pressing SHIFT again.
4Press DISC DIRECT PLAY 1-3 to select a disc.
5Press numbered buttons 0-9 on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
Example: When using a
In a few seconds, the tracks to be recorded on each side of the tape are determined.
• fand gare also available to designate the tape length.
Remaining time Programmed
of recording | tracks for side A | |
|
|
|
|
|
|
Tape side | Program number |
To add tracks from other discs to the edit program
If there is any time remaining on the tape after step 5, you can add tracks from other discs in the CD compartment.
1Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B.
2Press DISC DIRECT PLAY
3Press numbered buttons on the remote control to select tracks. A track whose playing time is longer than the remaining time cannot be programmed.
4Repeat steps 2 and 3 to add more tracks.
Time on cassette tapes and editing time
The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape’s specified recording time after editing, the display shows the extra time (without a minus mark), instead of the time remaining on the tape (with the minus mark).
The AI edit recording function cannot be used with discs containing 31 tracks or more. “TR OVER” is displayed if this is attempted.
En
Tape length Tape side Minus mark A: First recording side
B: Second recording side
ENGLISH 13
