PROGRAMMED EDIT RECORDING
In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape.
1Insert the tape into deck 1, and wind up to the
beginning of the front side.
Press Z to open the cassette holder and insert the tape with the side to be recorded on first facing out from the unit. Wind up the tape with f.
2Press CD and load the disc(s).
3Press CD EDIT/CHECK twice while pressing
SHIFT on the remote control.
“EDIT” and “PRGM” are displayed.
•When “AI” is displayed, press CD EDIT/CHECK while pressing SHIFT again.
4Press numbered buttons 0-9 on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
•fand gare also available to designate the tape length. Tape side A (front side)
Tape length | Maximum recording |
| time for side A |
5Press DISC DIRECT PLAY
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and 0.
Selected track number |
| Programmed tracks | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Program number | Remaining time on side A |
6Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time cannot be programmed.
7Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side B and program
the tracks for side B.
After confirming “B” on the display, repeat step 5.
Tape side B (reverse side)
8Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A and press w
to start recording.
CD play and recording of edited tracks for the first side start simultaneously. When the end of tape is reached, deck 1 enters the recording stop mode. After entering the recording stop mode, go to step 9.
9Press CD EDIT/CHECK while pressing SHIFT on the remote control for recording of the second
side.
“B” is displayed.
10Turn over the tape in deck 1 and press wto start
recording.
Recording starts.
To stop recording
Press Z on deck 1. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press f or g repeatedly.
|
|
|
|
| Programmed | |||
Disc number Track number | track numbers | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tape side | Program number |
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press s CLEAR to clear the program on the selected side. Then program tracks again.
To clear the edit program
Press sCLEAR twice so that “EDIT” disappears on the display.
•Up to 30 tracks can be programmed from any of the inserted discs.
•“FULL” is displayed if you attempt to program more than 30 tracks.
14 ENGLISH