Fujitsu MAW3147NC/NP, MAW3300NC/NP, MAW3073NC/NP manual Figures

	FIGURES
		page
Figure 1.1	NC model drives outer view	1-6
Figure 1.2	NP model drives outer view	1-6
Figure 1.3	System configuration	1-8
Figure 3.1	Cylinder configuration	3-2
Figure 3.2	Spare area in cell	3-4
Figure 3.3	Alternate cylinder	3-4
Figure 3.4	Track format	3-5
Figure 3.5	Track skew/head skew	3-6
Figure 3.6	Sector format	3-6
Figure 3.7	Alternate block allocation by FORMAT UNIT command	3-12
Figure 3.8	Alternate block allocation by REASSIGN BLOCKS command	3-13
Figure 4.1	NC model dimensions	4-2
Figure 4.2	NP model dimensions	4-3
Figure 4.3	HDD orientations	4-4
Figure 4.4	Mounting frame structure	4-5
Figure 4.5	Limitation of side-mounting	4-6
Figure 4.6	Surface temperature measurement points	4-7
Figure 4.7	Service clearance area	4-7
Figure 4.8	Spin-up current waveform (+12V DC)	4-8
Figure 4.9	Power on/off sequence (1)	4-8
Figure 4.10	Power on/off sequence (2)	4-9
Figure 4.11	Power on/off sequence (3)	4-9
Figure 4.12	AC noise filter (recommended)	4-11
Figure 4.13	NC connectors location	4-11
Figure 4.14	SCA2 type 16-bit SCSI connector	4-12
Figure 4.15	NP connectors and terminals location	4-13
Figure 4.16	68-pin type 16-bit SCSI interface connector	4-14
Figure 4.17	Power supply connector (68-pin type 16-bit SCSI)	4-14
Figure 4.18	External operator panel connector (CN1)	4-15
Figure 4.19	External operator panel connector (CN2)	4-15
Figure 4.20	16-bit SCSI ID external input	4-16

xii C141-E226