Important Alert Items

Important Alert Messages

The important alert messages in this manual are as follows:

A hazardous situation could result in minor or moderate personal injury if the user does not perform the procedure correctly. This alert signal also indicates that damages to the product or other property may occur if the user does not perform the procedure correctly.

Task	Alert message	Page

Mounting Installation	Data loss
	The drive adopts Reed-Solomon code for ECC.	2-5
	The sector-data is divided into 3 interleaving sectors, and ECC is
	performed in each sector where the maximum number of errors
	(up to 9 byte) can be corrected. [Total maximum byte: 9 byte ⋅ 3
	( interleave) = 27 byte]
	If the error of read sector keeps allowable error byte number,
	correction is performed.
	However, if error byte exceeds its allowable number, correction
	may not be performed properly.
	Damage
	Seals on the DE prevent the DE inside from the particle. Do not	4-4
	damage or peel off labels.
	Hot temperature
	To prevent injury, do not handle the drive until after the device has	5-1
	cooled sufficiently after turning off the power. The DE and LSI
	become hot during operation and remain hot immediately after
	turning off the power.
	Data loss
	1. The user must not change the setting of terminals not described	5-5
	in this section. Do not change setting status set at factory
	shipment.
	2. Do not change the setting of terminals except following setting
	pins during the power is turned on.
	• Write protect: Pin pair 9/10 of the CN2 setting terminal
	(NP model only)
	3. To short the setting terminal, use the short plug attached when
	the device is shipped from the factory.
	Damage
	1. Make sure that system power is off before connecting or	5-12
	disconnecting cables.
	2. Do not connect or disconnect cables when power is on.(except
	NC model)

C141-E205

MAU3036NC/NP, MAU3147NC/NP, MAU3073NC/NP specifications

The Fujitsu MAU3036NC/NP, MAU3147NC/NP, and MAU3073NC/NP are advanced models designed to offer high performance and reliability in various computing environments. These models are particularly notable for their optimized efficiency and robust feature set, making them suitable for a range of applications from enterprise servers to high-performance computing.

One of the standout features of the MAU series is its reliance on cutting-edge technology that maximizes data handling capabilities. The MAU3036NC/NP boasts a formidable capacity for high-speed data processing, making it ideal for tasks requiring quick data retrieval and storage. With an optimized caching mechanism, this model enhances data throughput and reduces latency, contributing to an overall faster response time in demanding applications.

The MAU3147NC/NP introduces further advancements with its enhanced thermal management system. This ensures that the unit operates at optimal temperatures, reducing the risk of overheating and prolonging the lifespan of the hardware. Additionally, this model implements advanced error-correcting code (ECC) memory, which significantly improves reliability by detecting and correcting internal data corruption, a crucial feature in mission-critical environments.

Meanwhile, the MAU3073NC/NP excels in terms of scalability. Its architecture allows for easy upgrades and expansions, accommodating growing data needs without significant downtime. This flexibility is essential for businesses looking to future-proof their operations and adapt to changing demands seamlessly.

All three models incorporate Fujitsu's innovative energy-efficient technologies, which not only reduce power consumption but also align with global sustainability goals. The intelligent power management systems make these units not only cost-effective but also environmentally friendly, demonstrating Fujitsu's commitment to responsible manufacturing.

Furthermore, robust connectivity options, including multiple interface support, make these models easily integrable into existing IT infrastructures. They are compatible with a variety of operating systems and software, ensuring that users can leverage their full potential regardless of their specific setup.

In summary, the Fujitsu MAU3036NC/NP, MAU3147NC/NP, and MAU3073NC/NP series exemplify the blend of performance, reliability, and efficiency. With features tailored to meet the evolving needs of modern businesses, these models stand out in the competitive landscape of computing solutions, ensuring that users can address both current and future challenges in data management and processing.