Fujitsu manual Installation, Jumper Setting Description, VCC is set to 5V ADA-16FX-ETHERNET

Page 6

ADA-16FX-ETHERNET

Chapter 3 Installation

3 Installation

Remove carefully the board from the shipping box and check for any damages.

Disconnect your SK-16FX-EUROSCOPE (SK-16FX-100PMC) evaluation board from USB and external power supply. Select the correct Voltage supply:

ADA-16FX-ETHERNET is designed for 5V power supply.

	Jumper	Setting		Description

	JP10 (5V/3V3)	1-2		VCC is set to 5V (ADA-16FX-ETHERNET)
	JP10 (5V/3V3)	2-3		VCC is set to 3.3V
		2-3		VCC is set to 3.3V

Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to face to the outer edge.

Ethernet jack

Note:

Make sure to jumper the board to 5V before connecting the ADA-16FX-ETHERNET.

UG-960011-11

- 6 -

© Fujitsu Microelectronics Europe GmbH

Image 6

Contents ²MC-16FX Family Revision History Warranty and Disclaimer No Liability for Consequential DamagesContents Overview Features of adapter board ADA-16FX-ETHERNETFeatures of base board SK-16FX-EUROSCOPE SK-16FX-100PMC AbstractVCC is set to 5V ADA-16FX-ETHERNET InstallationJumper Setting Description VCC is set toJumper settings of ADA-16FX-ETHERNET Jumper Description / Function Type DefaultJumpers and LED’s Chip select JP 1, 2Ethernet jack select JP 4 Link LED, Activity LED LINK, ACT Colour DescriptionEdge Connectors X2, X3 ConnectorsEthernet connector Connector MCU PinsSilk-Plot of the Board Related Products ADA-16FX-ETHERNETInformation in the WWW Http//mcu.emea.fujitsu.comUG-960011-11 Fujitsu Microelectronics Europe GmbH China-RoHS regulation Evaluation Board评估板 Emulation Board 仿真板∙ 此表所列数据为发布时所能获得的最佳信息 Recycling Gültig für EU-Länder