Fujitsu MB91360 manual Warranty and Disclaimer, No Liability for Consequential Damages

Page 3

STARTERKIT MB91360

Warranty and Disclaimer

Warranty and Disclaimer

To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for STARTERKIT MB91360 and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, the STARTERKIT MB91360 and all its deliverables are intended and must only be used in an evaluation laboratory environment.

1.Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer.

2.Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer´s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.

3.To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated.

4.To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its suppliers´ liability is restricted to intention and gross negligence.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES

To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product.

Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect

© Fujitsu Microelectronics Europe GmbH

- 3 -

UG-910006-13

Image 3
Contents MB91360 Series Revision History Date IssueNo Liability for Consequential Damages Warranty and DisclaimerContents Fujitsu Microelectronics Europe GmbH UG-910006-13 Key Features IntroductionAbstract General Board Usage Using the Starterkit as target board for the ICEMode Selection Hardware Installation InstallationSoftware Installation Softune Workbench Development Introduction Getting StartedUG-910006-13 Fujitsu Microelectronics Europe GmbH Softune Workbench Debugging Introduction SWB Debugging window Details of the included Monitor-Debugger Basic debugger featuresSTARTUP.ASM enabled #define Abort Advanced debugger features Examplecandump = Dump/Halfword 100000..1000ff Examplerestart set register PC=1f4000 set break main Generic Flash Programmer Flash ProgrammingIT can Damage the Flash ROM Permantently Board Components Evaluation Board HardwareOverview of Jumpers Jumper Description Standard Setting Jumper PositionJumper Description Connectors for resources and IO-signals Jumper Pin-No Pin Name IO-Port Resource Function JP15 JP14PWM1P0 PR0 SMC Memory Mappings MB91F362 AppendixMode 001 External Bus / User Mode Memory Type Used for Area Sections Tool options for own projectsStarterkit limitations Board Schematics UG-910006-13 Fujitsu Microelectronics Europe GmbH Fujitsu Microelectronics Europe GmbH UG-910006-13 Silk Screen Chip PAL ListingEquations MB91FV360GCR Development tools and accessoriesRelated Documents Trouble Shooting Problem SolutionTrouble Shooting Tables Figures