Fujitsu TX120 Switching the server on and off, Switching the server OFF, Other on/off options

Page 50

Switching the server on and off

Starting up and operation

Switching the server OFF

Power-on indicator (item 5 in figure 9 on page 44) lights green.

ÊShut down the operating system properly.

The server is automatically switched off. The power-on indicator lights up orange.

IIf the operating system does not switch the server off automatically, press the On/Off button for at least four seconds and/or send a corre- sponding control signal.

Other on/off options

In addition to the On/Off button, the server can be switched ON and OFF in the following ways:

Specified switch on time / switch off time

The server is switched ON or OFF at a time specified in the ServerView program

Ring indicator

The server is switched on by an internal or external modem.

Wake On LAN (WOL)

The server is switched on by a command via the LAN (Magic Packet).

After power failure

The server automatically reboots following a power failure (depending of the settings in the BIOS).

“Power override” function

The server can be switched off immediately by pressing and holding the On/Off button (approx. 4-5 sec.).

VCAUTION!

There is a risk that data may be lost.

IPMI

The server is switched on by an IPMI console via serial port COM1 (item 4 in figure 6 on page 40) or via the service LAN connection (item 3 in figure 6 on page 40).

50

Operating Manual

TX120

Image 50
Contents Primergy TX120 Server Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISOContents Contents Contents Page Introduction Documentation overviewAdditional server documentation Documentation overviewConcept and target groups for this manual Introduction Further sources of informationSystem board FeaturesFeatures Hard disk drivesUSB ports HDD expansion box and accessible drivesPower supply High level of availability and data securityIRMC with integrated service LAN port Server Management ServerStartService and support RemoteViewNotational conventions Electrical data Technical dataTechnical data Compliance with regulations and standardsUpright operating position WeightMechanical values Ventilation clearancePage Installation steps, overview Set up the server see section Setting up the server onInstallation steps, overview Safety Important informationBefore starting up SafetyInstallation and operation Important information Safety Batteries Never remove parts of the CD/DVD drive casing Working with CDs/DVDs and CD/DVD drivesLaser information Modules with Electrostatic-Sensitive Devices ESD labelCE conformity CE conformityFCC Class a Compliance Statement Other important informationTransporting the server Environmental protection Labels on plastic casing parts Returns, recycling and disposalPage Hours Hardware installationMinimum acclimatization time Unpacking the server Unpacking the serverSetting up the server Hardware installationSetting up the server Clipping the stabilizers togetherAdjusting the width of the stabilizers Adjusting the width of a stabilizerPlacing the server on the stabilizers Placing the server on stabilizersPositioning the server horizontally Connecting devices to the server Connecting devices to the serverConnecting the server to the mains Connecting the server to the mainsConnecting cables Disconnecting cablesStarting up and operation Opening the drive coverControls and displays Controls and displaysStarting up and operation ControlsIndicators on the control panel CD/DVD indicator Indicators on the HDD moduleRear of server System already installed Switching the server on and offSwitching the server on Starting up for the first timeSpecified switch on time / switch off time Switching the server on and offSwitching the server OFF Ring indicatorConfiguring the server ServerStart advantagesConfiguring onboard SAS controller Cleaning the serverCleaning the server Operating system installationProperty and data protection Mechanical access protectionBios Setup security functions Page Power cable incorrectly connected Troubleshooting and tipsPower-on indicator remains unlit Power supply overloadedServer switches itself off Screen remains blankNo screen display or display drifts Troubleshooting and tipsFlickering stripes on monitor screen Monitor does not support the set horizontal frequencyIncorrect date and time Mouse driver not loaded Mouse controller disabledNo mouse pointer displayed on screen No mouse pointer displayed on screenRAID controller configuration incorrect Drives reported as dead when starting systemError message on screen RAID controller is not configured for this drivePage Hot-plug hard disk drives Handling hard disk drives and HDD modules Handling hard disk drives and HDD modulesRemoving/Installing the dummy module Removing the dummy moduleUnlocking the HDD module Installing/Removing the HDD moduleInstalling/Removing the HDD module Installing the HDD module Installing the HDD moduleRemoving the HDD module Vcaution Page Abbreviations Abbreviations ESD IRMC PS/2 Rtds Svga Page Literature Operating Manual Index CD-RWIndex DVDPDA Saving energy Screen

TX120 specifications

The Fujitsu TX120 is a powerful and compact server designed primarily for small to medium-sized businesses looking for a reliable and efficient computing solution. This versatile server family is engineered to address a wide array of enterprise workloads, making it ideal for applications spanning from virtualization to database management.

At the core of the TX120 is its robust Intel architecture. It supports Intel’s latest processors, ensuring high performance and responsiveness in data processing. With options for either single or dual processors, the TX120 is versatile enough to scale with your business needs. It can accommodate multiple cores, leading to enhanced multitasking capabilities and improved processing power for demanding applications.

Memory capacity is another key feature of the Fujitsu TX120. The server supports a generous amount of DDR4 RAM, allowing for faster data access speeds and enhanced overall system performance. With multiple DIMM slots available, businesses can expand memory as needed to accommodate growing workloads.

In terms of storage, the TX120 offers a flexible configuration, supporting both HDD and SSD options. This versatility allows users to balance speed and capacity according to their specific requirements. The server also features advanced RAID support, which provides redundancy and improved data integrity, ensuring that critical business information is well protected.

The design of the TX120 emphasizes energy efficiency. Fujitsu integrates technologies aimed at reducing power consumption without compromising performance. This commitment to energy efficiency not only lowers operational costs but also minimizes the overall environmental impact, making the TX120 an eco-friendly server choice.

Connectivity is another standout feature of the TX120. It supports multiple Ethernet ports, enabling fast networking capabilities. Additionally, the server can be equipped with various expansion slots for add-on cards, which facilitates an easy upgrade path as technology evolves.

Fujitsu also provides robust management features with the TX120, offering remote management capabilities that help IT personnel monitor and manage the server infrastructure efficiently. This is particularly beneficial for businesses that may lack dedicated on-site IT staff.

In conclusion, the Fujitsu TX120 stands out as a reliable, scalable, and energy-efficient server solution tailored for small to medium enterprises. Its combination of powerful processing, flexible storage options, and effective management features make it a compelling choice for businesses looking to enhance their IT infrastructure.