Fujitsu TX120 manual HDD expansion box and accessible drives, USB ports, Power supply

Page 11

Introduction

Features

HDD expansion box and accessible drives

Two mounting locations are available:

–a 3.5-inch bay for an HDD expansion box or a backup drive.

–a 5.25 inch bay with a slimline CD/DVD drive.

The accessible drives cannot be replaced during operation.

USB ports

The USB ports on the front of the device enable USB devices to be connected directly. The maximum length of the external cable are three meters.

Power supply

The server has a built-in power supply unit, which automatically sets itself to a mains voltage in the range 100 V - 127 V or 200 V - 240 V.

High level of availability and data security

When memory data is accessed, 1-bit errors in the main memory are identified and automatically corrected with the ECC (Error Correcting Code) method.

ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in case of an error and automatically “hides” the defective system components.

The PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens Computers analyzes and monitors all components that are critical for system reliability.

The onboard SAS controller supports RAID levels 0 and 1, thereby increasing the availability of the system. The hot-plug HDD modules provide additional security.

TX120

Operating Manual

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Primergy TX120 Server Certified documentation according to DIN EN ISO Comments… Suggestions… Corrections…Contents Contents Contents Page Documentation overview IntroductionAdditional server documentation Documentation overviewConcept and target groups for this manual Further sources of information IntroductionHard disk drives FeaturesFeatures System boardHigh level of availability and data security HDD expansion box and accessible drivesPower supply USB portsIRMC with integrated service LAN port ServerStart Server ManagementRemoteView Service and supportNotational conventions Compliance with regulations and standards Technical dataTechnical data Electrical dataVentilation clearance WeightMechanical values Upright operating positionPage Set up the server see section Setting up the server on Installation steps, overviewInstallation steps, overview Important information SafetyBefore starting up SafetyInstallation and operation Important information Safety Batteries Never remove parts of the CD/DVD drive casing Working with CDs/DVDs and CD/DVD drivesLaser information ESD label Modules with Electrostatic-Sensitive DevicesOther important information CE conformityFCC Class a Compliance Statement CE conformityTransporting the server Environmental protection Returns, recycling and disposal Labels on plastic casing partsPage Hours Hardware installationMinimum acclimatization time Unpacking the server Unpacking the serverHardware installation Setting up the serverClipping the stabilizers together Setting up the serverAdjusting the width of a stabilizer Adjusting the width of the stabilizersPlacing the server on stabilizers Placing the server on the stabilizersPositioning the server horizontally Connecting devices to the server Connecting devices to the serverConnecting the server to the mains Connecting the server to the mainsDisconnecting cables Connecting cablesOpening the drive cover Starting up and operationControls and displays Controls and displaysControls Starting up and operationIndicators on the control panel Indicators on the HDD module CD/DVD indicatorRear of server Starting up for the first time Switching the server on and offSwitching the server on System already installedRing indicator Switching the server on and offSwitching the server OFF Specified switch on time / switch off timeServerStart advantages Configuring the serverOperating system installation Cleaning the serverCleaning the server Configuring onboard SAS controllerProperty and data protection Mechanical access protectionBios Setup security functions Page Power supply overloaded Troubleshooting and tipsPower-on indicator remains unlit Power cable incorrectly connectedScreen remains blank Server switches itself offMonitor does not support the set horizontal frequency Troubleshooting and tipsFlickering stripes on monitor screen No screen display or display driftsNo mouse pointer displayed on screen Mouse driver not loaded Mouse controller disabledNo mouse pointer displayed on screen Incorrect date and timeRAID controller is not configured for this drive Drives reported as dead when starting systemError message on screen RAID controller configuration incorrectPage Hot-plug hard disk drives Handling hard disk drives and HDD modules Handling hard disk drives and HDD modulesRemoving the dummy module Removing/Installing the dummy moduleUnlocking the HDD module Installing/Removing the HDD moduleInstalling/Removing the HDD module Installing the HDD module Installing the HDD moduleRemoving the HDD module Vcaution Page Abbreviations Abbreviations ESD IRMC PS/2 Rtds Svga Page Literature Operating Manual CD-RW IndexDVD IndexPDA Saving energy Screen

TX120 specifications

The Fujitsu TX120 is a powerful and compact server designed primarily for small to medium-sized businesses looking for a reliable and efficient computing solution. This versatile server family is engineered to address a wide array of enterprise workloads, making it ideal for applications spanning from virtualization to database management.

At the core of the TX120 is its robust Intel architecture. It supports Intel’s latest processors, ensuring high performance and responsiveness in data processing. With options for either single or dual processors, the TX120 is versatile enough to scale with your business needs. It can accommodate multiple cores, leading to enhanced multitasking capabilities and improved processing power for demanding applications.

Memory capacity is another key feature of the Fujitsu TX120. The server supports a generous amount of DDR4 RAM, allowing for faster data access speeds and enhanced overall system performance. With multiple DIMM slots available, businesses can expand memory as needed to accommodate growing workloads.

In terms of storage, the TX120 offers a flexible configuration, supporting both HDD and SSD options. This versatility allows users to balance speed and capacity according to their specific requirements. The server also features advanced RAID support, which provides redundancy and improved data integrity, ensuring that critical business information is well protected.

The design of the TX120 emphasizes energy efficiency. Fujitsu integrates technologies aimed at reducing power consumption without compromising performance. This commitment to energy efficiency not only lowers operational costs but also minimizes the overall environmental impact, making the TX120 an eco-friendly server choice.

Connectivity is another standout feature of the TX120. It supports multiple Ethernet ports, enabling fast networking capabilities. Additionally, the server can be equipped with various expansion slots for add-on cards, which facilitates an easy upgrade path as technology evolves.

Fujitsu also provides robust management features with the TX120, offering remote management capabilities that help IT personnel monitor and manage the server infrastructure efficiently. This is particularly beneficial for businesses that may lack dedicated on-site IT staff.

In conclusion, the Fujitsu TX120 stands out as a reliable, scalable, and energy-efficient server solution tailored for small to medium enterprises. Its combination of powerful processing, flexible storage options, and effective management features make it a compelling choice for businesses looking to enhance their IT infrastructure.
Top Page Image Contents