Lifebreath installation manual Models RNC120F/120ERV, Leave For Homeowner, Balancing Tools

Models RNC120F/120ERV

Shipping and Packing List

Package 1 of 1 contains:

1 - Assembled ventilator

1 - Bag assembly containing:

4 - Hanging straps

1 - Installation manual

1 - Remote electrical control box

1 - Bag containing sealant putty

Required Tools

Installation Tools

•	tin snips	•	large zip ties
•	assorted screw drivers	•	fabric flexible duct
•	electric drill		- class I rated
•	hammer	•	mastic tape
•	wire strippers	•	alum. foil duct tape
•	knife	•	zip ties
•	caulking gun	•	1/2” I.D. drain hose

•smoke pencil

Balancing Tools

•Pitot Tube Balancing Kit

[Case, 8 ft. vinyl tubing, Pitot tube, magnehelic gauge (0 - 0.25”), and mounting plate]

or

•Pitot Tube with instructions

and Digital Manometer (with resolution of 0 - 0.25” - must read to 1/100ths of an inch)

Optional Accessories

•20 Minute Fan Timer

•Wall Mounted Dehumidistat

•Weather hood Kit

•Round Diffuser

4” (100mm) 5” (125mm) 6” (150mm) 8” (200mm)

•Kitchen Grille

-may be required by code for kitchen applications

-contains removable grease filter

Application

Heat Recovery Ventilators (HRV) are designed to provide fresh air while exhausting an equal amount of stale air.

The HRV is equipped with an aluminum core. The device uses the stale air that is being exhausted to condition the fresh air as it is being brought in.

General

These instructions are intended as a general guide and do not supersede local codes in any way. Consult authorities who have jurisdiction before installation.

Table of Contents

Shipping and Packaging List	1
Required Tools	1
Application	1
General	1
Engineering Data	2-5
Installation Instructions	6
Clearances & Requirements	7
Installation	7-10
Application Illustrations	11-16
Remote Control Devices	17
Wiring the Controls	18
Electrical	19
Operation	20
Wiring Diagrams	21
Interlocking HRV to Furnace	22
Air Flow Balancing	24-25
Troubleshooting	26
Maintenance	27
* LEAVE FOR HOMEOWNER
	TI-CCU-001
NOTE: Due to ongoing research and product development, specifications,
	0108
ratings and dimensions are subject to change without notice.