Fujitsu TX120 manual Cleaning the server, Configuring onboard SAS controller

Page 52

Cleaning the server

Starting up and operation

To find out how to operate ServerStart and for further information, refer to the corresponding manual (see “Literature” on page 77).

If you are using ServerStart, you can skip the following section on how to configure the server and install the operating system. Continue from section “Cleaning the server” on page 52.

5.4.3Configuration without ServerStart

Configuring onboard SAS controller

Configure the controller as described in section “Configuring onboard SAS controller” on page 51.

Operating system installation

ÊInsert the CD/DVD for the operating system you want to install.

ÊReboot the server.

ÊFollow the instructions on screen and in the manual for the operating system.

5.5Cleaning the server

VCAUTION!

Switch the server off and disconnect the power plugs from the grounded shockproof sockets.

Do not clean any interior parts yourself; leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic.

Ensure that no liquid enters the system. Ensure that the ventilation areas of the server and the monitor are clear.

Clean the keyboard and the mouse with a disinfecting cloth.

Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in a mild domestic detergent and then carefully wrung out.

52

Operating Manual

TX120

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Primergy TX120 Server Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISOContents Contents Contents Page Introduction Documentation overviewConcept and target groups for this manual Documentation overviewAdditional server documentation Introduction Further sources of informationFeatures FeaturesSystem board Hard disk drivesHDD expansion box and accessible drives Power supplyUSB ports High level of availability and data securityIRMC with integrated service LAN port Server Management ServerStartService and support RemoteViewNotational conventions Technical data Technical dataElectrical data Compliance with regulations and standardsWeight Mechanical valuesUpright operating position Ventilation clearancePage Installation steps, overview Set up the server see section Setting up the server onInstallation steps, overview Safety Important informationInstallation and operation SafetyBefore starting up Important information Safety Batteries Laser information Working with CDs/DVDs and CD/DVD drivesNever remove parts of the CD/DVD drive casing Modules with Electrostatic-Sensitive Devices ESD labelCE conformity FCC Class a Compliance StatementCE conformity Other important informationTransporting the server Environmental protection Labels on plastic casing parts Returns, recycling and disposalPage Minimum acclimatization time Hardware installationHours Unpacking the server Unpacking the serverSetting up the server Hardware installationSetting up the server Clipping the stabilizers togetherAdjusting the width of the stabilizers Adjusting the width of a stabilizerPlacing the server on the stabilizers Placing the server on stabilizersPositioning the server horizontally Connecting devices to the server Connecting devices to the serverConnecting the server to the mains Connecting the server to the mainsConnecting cables Disconnecting cablesStarting up and operation Opening the drive coverControls and displays Controls and displaysStarting up and operation ControlsIndicators on the control panel CD/DVD indicator Indicators on the HDD moduleRear of server Switching the server on and off Switching the server onSystem already installed Starting up for the first timeSwitching the server on and off Switching the server OFFSpecified switch on time / switch off time Ring indicatorConfiguring the server ServerStart advantagesCleaning the server Cleaning the serverConfiguring onboard SAS controller Operating system installationBios Setup security functions Mechanical access protectionProperty and data protection Page Troubleshooting and tips Power-on indicator remains unlitPower cable incorrectly connected Power supply overloadedServer switches itself off Screen remains blankTroubleshooting and tips Flickering stripes on monitor screenNo screen display or display drifts Monitor does not support the set horizontal frequencyMouse driver not loaded Mouse controller disabled No mouse pointer displayed on screenIncorrect date and time No mouse pointer displayed on screenDrives reported as dead when starting system Error message on screenRAID controller configuration incorrect RAID controller is not configured for this drivePage Hot-plug hard disk drives Handling hard disk drives and HDD modules Handling hard disk drives and HDD modulesRemoving/Installing the dummy module Removing the dummy moduleInstalling/Removing the HDD module Installing/Removing the HDD moduleUnlocking the HDD module Installing the HDD module Installing the HDD moduleRemoving the HDD module Vcaution Page Abbreviations Abbreviations ESD IRMC PS/2 Rtds Svga Page Literature Operating Manual Index CD-RWIndex DVDPDA Saving energy Screen

TX120 specifications

The Fujitsu TX120 is a powerful and compact server designed primarily for small to medium-sized businesses looking for a reliable and efficient computing solution. This versatile server family is engineered to address a wide array of enterprise workloads, making it ideal for applications spanning from virtualization to database management.

At the core of the TX120 is its robust Intel architecture. It supports Intel’s latest processors, ensuring high performance and responsiveness in data processing. With options for either single or dual processors, the TX120 is versatile enough to scale with your business needs. It can accommodate multiple cores, leading to enhanced multitasking capabilities and improved processing power for demanding applications.

Memory capacity is another key feature of the Fujitsu TX120. The server supports a generous amount of DDR4 RAM, allowing for faster data access speeds and enhanced overall system performance. With multiple DIMM slots available, businesses can expand memory as needed to accommodate growing workloads.

In terms of storage, the TX120 offers a flexible configuration, supporting both HDD and SSD options. This versatility allows users to balance speed and capacity according to their specific requirements. The server also features advanced RAID support, which provides redundancy and improved data integrity, ensuring that critical business information is well protected.

The design of the TX120 emphasizes energy efficiency. Fujitsu integrates technologies aimed at reducing power consumption without compromising performance. This commitment to energy efficiency not only lowers operational costs but also minimizes the overall environmental impact, making the TX120 an eco-friendly server choice.

Connectivity is another standout feature of the TX120. It supports multiple Ethernet ports, enabling fast networking capabilities. Additionally, the server can be equipped with various expansion slots for add-on cards, which facilitates an easy upgrade path as technology evolves.

Fujitsu also provides robust management features with the TX120, offering remote management capabilities that help IT personnel monitor and manage the server infrastructure efficiently. This is particularly beneficial for businesses that may lack dedicated on-site IT staff.

In conclusion, the Fujitsu TX120 stands out as a reliable, scalable, and energy-efficient server solution tailored for small to medium enterprises. Its combination of powerful processing, flexible storage options, and effective management features make it a compelling choice for businesses looking to enhance their IT infrastructure.
Top Page Image Contents