Fujitsu fi-4640S manual

2At Screen 59, press or to select “On”

then press if you want to activate the setting function. The scanner displays Screen 59-1, indicating that the setting function is activated.

NOTICE

When the setting function is disabled, the screen is as shown right.

<Screen 59-1>

3At Screen 59-1, select the number of digits.

Press or to select “5” or “8” then press

. The scanner displays Screen 59-2.

<Screen 59-2>

4At Screen 59-2, select the initial number. Press or to move the place of the

blinking (changeable) digit and press or

to change the value, then press . The scanner displays Screen 59-3.

NOTICE

The possible maximum number is 99999 (for five digits) or 16777215 (for eight digits).

<Screen 59-3>

5At Screen 59-3, specify whether the number

is initialized at hopper empty. Press or to select “On” if you want to initialize, then

press . The scanner displays Screen 59-4.

<Screen 59-4>

6At Screen 59-4, specify whether the number

is reset at once. Press or to select “yes” if you want to reset at once, then press . The scanner terminates the setup mode.

NOTICE

The command from the host computer overrides the specification of the operator panel. When the host computer issues a command disabling the specification of the operator panel, Screen 59-4 does not appear.

7-16