Fujitsu fi-4110CU manual Fi-4110CU Image Scanner Operator’s Guide

Page 29

Clean the automatic document feeder through the following procedure (see the figure on the next page for location):

1)Open the automatic document feeder by pulling it toward you while raising the cover open lever.

2)Clean the following components with a dry cloth or a cloth moistened with cleaner

F1 or isopropyl alcohol:

Pad

Clean the pad downward (in arrow direction) with a cloth

 

moistened with cleaner F1 or isopropyl alcohol.

 

In this case, be careful not to catch the cloth in the pick arm

 

or spring.

 

 

Glass surface,

Clean these surfaces gently with a dry cloth.

White sheet

 

surface

 

 

 

Pick roller,

Gently clean the surface of these rollers with a cloth

Facing roller,

moistened with cleaner F1 or isopropyl alcohol, while

Feed roller

rotating the roller by fingers.

 

If many foreign matters stick to the roller, the roller

 

becomes slippery; therefore, thoroughly clean it.

 

 

Eject roller

Clean the roller while rotating the roller with power on.

 

1.With power on, open the automatic document feeder by

 

pulling it toward you while raising the cover open lever.

 

(*1)

 

2.Pressing the two round buttons on the operator panel at

 

the same time causes the eject roller to rotate little by

 

little.

 

3.Gently clean the surface of the roller with a cloth

 

moistened with cleaner F1 or isopropyl alcohol, while

 

rotating the roller with the cloth pressed against the

 

surface of the roller. (As a guideline, the eject roller

 

rotates one revolution every seven presses.)

 

If many foreign matters stick to the roller, the roller

 

becomes slippery; therefore, thoroughly clean it.

 

 

*1: Be sure to open the automatic document feeder when the operator panel display indicates other than “P” or “0”. While the display indicates “P” or “0”, the eject roller does not rotate even if you press the round buttons.

4-4

fi-4110CU Image Scanner Operator’s Guide

Image 29
Contents Fi-4110CU Image Scanner Operator’s Guide For Safe Operation Bescheinigung des Herstellers/Importeurs Trademark Acknowledgment Preface Conventions for Alert Messages Important Notes to UsersContents Regular Replacement Components 1 fi-4110CU Image Scanner Confirming the Content of Packing BoxOutline Component Names and Functions Fi-4110CU Image Scanner Operator’s Guide Internal Feed roller Eject roller Facing roller Fire, electric shock, falling, or dropping Installation and ConnectionKey point Mounting the Document SupportConnection Confirming the System Conditions Connecting the Power CableInstalling the Device Driver and Software Connecting to the ComputerSetting up the Stacker and Document Support Paper Extension Operation Before Scanning or Copying a Document Confirming Document Condition Setting Documents Scanning Documents Fi-4110CU Image Scanner Operator’s Guide Handling a Paper Jam Daily MaintenanceDaily Maintenance Cleaning the Automatic Document Feeder CleaningFi-4110CU Image Scanner Operator’s Guide Parts to be Cleaned on the Automatic Document Feeder Procedure for Replacing the Pad Unit Consumables and Regular Replacement ComponentsProcedure for Replacing the Pick Roller Unit Paw Knob Pick Roller unit When you suspect that a fault occurred Fi-4110CU Image Scanner Operator’s Guide Installation Specifications Page Declaration of Conformity Fi-4110CU Image Scanner Operator’s Guide