Fujitsu fi-4990C manual Contents of the Test Mode

Page 103

Contents of the Test Mode

The test mode includes the user test functions listed in the following table. This section explains “Offline feed test”, “Options”, and “Device life” which are necessary for users.

NOTE

If you need to use test functions other than “Offline feed test”, “Options”, and “Device life”, contact your dealer.

The user test functions are as follows:

Test item	Description


Offline feed test	Scans sheets continuously for checking conditions of paper feeding.

* Endorser test	Implements the Endorser‘s Print test.

Options	Displays the options installed in the scanner.

Device life	Displays the accumulative number of sheets fed and the accumulative number of hours for
	lamps lit since the scanner has been installed, to estimate the life of the device.

Sensor auto adjustment	Automatically adjusts sensors.

Offset auto adjustment	Adjusts offset using adjustment sheets.

Operation panel test	Tests functions of the LCD, LEDs, and buttons to check the operator panel.

Revision Display	Displays the revision of the program EEPROM, VDC-C, Interface farmware.

Sensor status	Displays the status of the sensors.

Sensor adjustment	Changes the current and slice level of sensors to adjust the sensors.

white balance adjustment	Adjust the Amp Gain Value for R,G, B when put the white paper in to scanner.

+5V voltage check	Displays the voltage of +5 volts.

EEPROM edit	Writes arbitrary data in EEPROM (address 00 to FF) to confirm or change the set values.

*If the option is not mounted, the set up item for the option does not display on the screen and skips to the next item.

6-51

Image 103

Contents Fi-4990C Image Scanner Fi-4990C Image Scanner Page Fujitsu Limited Japan Important Note to Users Preface TIONS, Operating INSTRUCTION, Document SpecificationConventions Contents Components Components Checking the Components Units Units and AssembliesName Function Assemblies Arrangement Operator PanelLCD Display Button/LED FunctionOperation status display Sound condition Function BuzzerInstallation and Connections Achtung PrecautionsInspection Label C An example Connecting the power cable Turning the main line switch offCable Connection Connecting the interface cable Attach the stop lever to the scanner Operating Instruction Turning the Power On Basic Operation of the Operator Panel Displaying detailed information if an error occurredLifting or lowering the hopper Aaaaaaaa Mmmm Clearing a consumable life alarmValue Meaning Description Confirming the number of sheets processed by the scannerUsing the function buttons F1, F2, and F3 Using the setup, browse, and test modes Turn off to quit Mode Select Blinking Occurred Transition of operator panel status and displayPage Documentspecification Scanner Maximum Minimum Fi-4990C Document SizeDocument Quality Ream weight of paperPaper types of documents Precautions Page Areas that must not be perforated Document LimitationsShows the document as viewed from the reading surface Print phohibit areas on the front and back surfacesGrounding color area Grounding Color AreaPrint density measurement Drop-out ColorDrop-out color standards Shape Job Separation SheetDocument type Specifications Specification Installation SpecificationsExternal Dimensions Consumables Name Specification Service life and remarksOptions SETUP, BROWSE, and Test Modes Functions not available in setup mode Setup, Browse, and Test ModesFunctions not available in browse mode Button functions in setup or browse mode Activating the Setup or Browse ModeReady Mode selection Menu pressed in Ready status Contents of the Setup or Browse Mode Scsi ID Setup mode menu screen Transition of screens in setup modePaper Length Check Paper length check10 mm Doublefeed check Setup Mode Paper Length Check ReadySetup Mode Paper Length Check Setup Mode Doublefeed CheckDoublefeed Check Mode Thickness & Roller Doublefeed Check ModeDoublefeed Check Paper thickness setup Paper Thickness Setup Ready Paper Thickness Setup Adjusting FinishedSkew Check Check OFF Check on Skew checkSkew Check Ready IPC-3 Mode IPC-3 modePaper types and corresponding pattern numbers Reading parameter validity Hopper Height Sheets Hopper heightPaper separation level Paper Separation Level Normal Medium Thin Set braking power according to the table belowPaper Separation Level Ready Drop-out Color Front Green Back Green Front Green Back Red Drop-out colorDrop-out Color Ready Background changeoverBackground Changeover White B White Background Changeover White B White White B Black Consumable counterBackground Changeover Ready Setup Mode Consumable Counter Reset Reest Counter Value 00250000 Consumable counter resetFinished resetting Consumable alarm modeConsumable Counter Reset Consumable Alarm Mode Buzzer BuzzerBuzzer Ready Buzzer Volume Min n n q q q q Max Min n n n q q q Max Buzzer volumeLCD contrast Buzzer Volume ReadyLCD Contrast Dark n n q q q q Bright LCD Contrast Dark n n n q q q Bright Picking speedLCD Contrast Ready Picking Speed Fast Slow Tpif baud ratePicking Speed Ready Tpif Baud Rate 19200 Tpif Baud Rate 9600Tpif Baud Rate Scsi ID Product ID Product IDProduct ID Fi-4990C Product ID M3099GPre-pick Pre-pickPre-pick Ready Pick start time 01.0 S 05.0 S Pick start timePick start time Ready Manual Feed Timeout 10 S Setup Mode Manual Feed Timeout Manual feed timeoutPaper Pick retry Step Times Paper pick retryPaper Feed retry Paper feed retryPaper Pick retry Times Paper Pick retry ReadyPaper Feed retry Times Step Function keyStart Function Key F1 F2 F3 F1 selection Undefined Start keyFunction Key F1 F2 F3 F2 selection Undefined Eject key Setup mode lockSetup Mode Lock Language English LanguageLanguage Ready Setup Mode White follower mode White follower modeInterface board slot Paper Length Check Setup Mode Interface Board SlotInterface Board Slot Scsi bus width settingScsi Bus Width setting Scsi Bus Width Setting 16 bit BitPlease wait Activating the Test ModeButton functions in test mode Test Mode Offline Feed TestMode selection power on with Menu pressed Contents of the Test Mode 200 Offline feed testFeeding 123456781234 200 LAOptions Endorser BG. Change Options12345678 Device lifeDevice Life Lamp FPage Automatic separation Automatic start mode manual start modeBrowse mode A4 sizeDither Duplex reading modeEquipment Error Error diffusionImage emphasis Front-side reading = Front-side scanningHalftone processing HexadecimalLetter size Linedrawing modeManual Feed mode = Manual Mode LandscapePicking time Paper Jam Photograph mode White level follower OFFPhoto mode = photograph mode Picking start timeTemporary Error Setup modeSimplex reading mode Start command time-outIndex LED Page Page Page This manual uses recycled paper