Fujitsu fi-4990C manual Paper length check, Paper Length Check, 10 mm

Paper length check

This function sets and detects a difference in paper length. You cannot change settings if they are set by the host computer.

LCD display	Options	Remarks
Paper Length Check	On, Off (Default: Off)	Checked or not
	10 mm, 15 mm, 20 mm (Default: 10 mm)	Difference:
		XX mm means that it is not regarded as an
		error when the actual difference of paper length
		is within the limits of ±XX mm.

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Paper Length Check) appears.

2.Press ENTER .

The option select screen indicates the current options with OFF blinking (blinking indicates “changeable”).

3.Press or .

The displayed option changes (ON).

4.Press .

The current difference 10 mm blinks (blinking indicates “changeable”).

5.Press or .

The displayed option changes (15 mm or 20 mm).

<<SETUP MODE>>

<<SETUP MODE>>

Paper Length Check

Paper Length Check

	OFF		10 mm
Paper Length Check
		ON	10 mm
Paper Length Check
		ON	10	mm
Paper Length Check
		ON	20	mm

6-7