IBM P09N4108 manual Need Take

Windows 98

Follow

these

instructions

to

install

the

device

driver

for

Windows

98.

1.

After

you

have

attached

the

CD-ROM

drive

to

your computer,

turn on

your

computer

if

it

is

not

turned

on

already.

2.

In the

New

Hardware

Wizard

for

IBM

USB

Portable

CD-ROM

Drive

window,

click

Next .

3.

Click

to

select

theS arch

for

the

best

driver

for

your

device

check

box.

4.

Insert

theIBM USB Portable CD-ROM Drive Option Diskette

into

your diskette

drive.

5.

Click

to

select

theFloppy

disk

drive

check

box.

6.

Click

Next

twice.

7. Click Finish to complete the device driver installation.

You can now use the CD-ROM drive with Windows 98.

Windows 2000

The Windows 2000		operating		system	includes		a	USB	device	driver. The	operating
system	recognizes	the	CD-ROM drive as			soon		as	it is	attached	and uses the correct
device	driver. The	device		driver	included	on	the		IBM USB Portable CD-ROM Drive
Option Diskette		is	not	required	for	Windows		2000.

Using

the

CD-ROM

drive

audio

player

functions

There

are

two

ways

to

use

the CD-ROM drive

to

play

audio

CDs.

You

can

use

the

Microsoft

Windows

CD

Player,

with

which

you

can

control

the

CD

playback

on

your

computer

screen.

You

can

also

use

the

two

audio

control

buttons

on

the

front

of

the

CD-ROM

drive.

Note:

You

must

close

the

Microsoft

Windows

CD

Player

in order

to

use

the

control

buttons

on the

front

of

the

CD-ROM

drive.

The

buttons

will

not

work

while

the

Microsoft

Windows

CD

Player is running.

Although

there

are

only two

control buttons

on

the

front

of

the

CD-ROM

drive,

you

can

use

those

two

buttons

to

perform

all

the

major

functions

of

a

normal

CD

player.

Refer

to

the

following

table

to

determine

what sequence of

actions

you

need

to

take in

order

to

perform

each

function.

1-10 USB Portable CD-ROM Drive