Hubbell 69320-101 manual Operation, Installation and Maintenance

Page 12

 

Pub. 42004-693L2C

Model 69320-101 Voice Network Adapter

Page: 12 of 15

Operation

After installation, the Model 69320-101 Voice Network Adapter (VNA) should start automatically. The VNA requires no direct user intervention during normal operations.

Installation and Maintenance

Direct questions about installation of this product to the GAI-Tronics Field Service Department at 800-492- 1212 inside the USA or 610-777-1374 outside the USA.

Installation Guidelines

WARNING Disconnect power to the card rack before performing any maintenance.

Installation Instructions

1.Remove the VNA from its protective carton.

2.Verify that power is disconnected to the card rack prior to installation.

3.Verify that the switch and jumper settings described in the Switch and Jumper Settings section on page 4 are set in accordance with the instructions in your system manual.

4.Align the VNA into the upper and lower tracks for the card rack slot.

5.Slide the VNA toward the rear of the card rack until it comes in contact with the connector on the backplane.

6.Firmly press on the front bezel until the VNA is seated in the backplane connector, and tighten the two screws located on the front bezel to secure it to the card rack.

Removing the VNA Card from the Card Rack

1.Remove power from the card rack.

2.Remove the two screws on the front bezel that secures the VNA to the card rack.

3.Gently disengage the VNA from the connector on the backplane and slide the VNA out of the card rack.

\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-693l2c.doc 04/06

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MCU is running and is configured to recognize the VNA Confidentiality NoticeGeneral Information Description of Major ComponentsMCU FLT Connections to the Field Wiring Terminal Blocks LOS/RCLSwitch and Jumper Settings T1 signal and the MCU reports a T1 line fault DB long haulDB limited long haul All front panel LEDs function normallySignal’s timing. The VNA is the T1 Clock Master Bus Clock MasterClock Slave VNA is a T1 Clock SlaveSet the E1 Select switch according to the following table VNA uses T1 signalingDisabled. This setting is recommended Set the Reserved switches according to the following tableSecond InternalDIPSwitchSW1 Settings Model 69320-101 Voice Network Adapter Board Layout Diagram Changingto a69320-101VNA froma 69266-001T1 Interface Means closed means open Installation and Maintenance Installation Guidelines Installation InstructionsOperation Removing the VNA Card from the Card RackFrequently Asked Questions Specifications ElectricalReplacement Parts EnvironmentalMechanical ApprovalWarranty Return Policy

69320-101 specifications

The Hubbell 69320-101 is a robust and versatile electrical device designed for a variety of commercial and industrial applications. It stands out in the field of electrical solutions, combining innovative technologies with proven reliability. One of its main features is its ability to support a wide array of power and data requirements, making it an ideal choice for modern facilities looking to streamline their electrical systems.

One notable characteristic of the Hubbell 69320-101 is its durable construction. Built with high-quality materials, it is engineered to withstand harsh environments, ensuring longevity and consistent performance. This resilience is particularly important in settings that experience high traffic, exposure to heavy machinery, or challenging weather conditions.

Additionally, the Hubbell 69320-101 is equipped with advanced technologies that facilitate easy installation and maintenance. Its design includes features such as snap-on covers and easy access points, which help reduce installation time and simplify any necessary service procedures. This user-friendly design is essential for ensuring that technicians can perform their duties efficiently and safely.

The device also boasts enhanced safety features, such as ground fault protection and robust insulating properties. These safety mechanisms prevent electrical hazards and protect both users and connected equipment from potential damage. Such considerations are crucial for meeting various industry standards and regulations, providing peace of mind for operators and facility managers alike.

Another significant aspect of the Hubbell 69320-101 is its adaptability. It is compatible with a wide range of electrical systems, making it suitable for diverse projects ranging from office buildings to manufacturing plants. This flexibility allows users to integrate the Hubbell 69320-101 into existing infrastructures with minimal disruption, maximizing productivity.

Furthermore, the Hubbell 69320-101 comes with multiple configuration options, allowing users to tailor it to their specific power distribution and data needs. The ability to customize the device not only enhances usability but also ensures that it meets the unique demands of different applications.

In summary, the Hubbell 69320-101 is an outstanding electrical solution characterized by its durability, safety features, and adaptability. With its innovative design and technology, it continues to be a trusted choice for professionals seeking reliable electrical devices that can meet the challenges of today’s dynamic environments.
Top Page Image Contents