Hubbell 69320-101 manual Frequently Asked Questions

Page 13

 

Pub. 42004-693L2C

Model 69320-101 Voice Network Adapter

Page: 13 of 15

Frequently Asked Questions

Q:Is the 69320-101 VNA compatible with the public switched telephone network?

A:No.

Q:When does the 69320-101 VNA generate at T1 Yellow Alarm?

A:Never.

Q:When does the 69320-101 VNA generate a T1 Blue Alarm?

A:Never.

Q:What is the T1 Red Alarm?

A:The T1 Red Alarm is the Loss of Signal (LOS) or Receive Carrier Loss (RCL) condition.

Q:Why do the LEDs have two labels?

A:One label is the newer vernacular; the other is the older vernacular.

Q:Why does the front panel “Lamp Test” switch not function while the VNA detects the MCU is running (the MCU FLT LED is off)?

A:That behavior is by design. That design choice helps prevent the diagnostic function of the front panel LEDs from being defeated while the system is in use.

Q:What feature does setting all front panel DIP switches to closed enable?

A:Doing so enables all four relays on the VNA, lights all LEDs on the VNA, and routes a 2.0000 kHz tone (assuming a different signal has not been loaded after power up) to all backplane audio lines and backplane ST-Bus data lines. This feature is used to approximate the maximum power consumption and electromagnetic emissions of the VNA. This feature interferes with normal system operations, and is disabled while the VNA detects the MCU is running.

Q:Is the 69320-101 VNA capable of generating E1 timing instead of T1 timing.

A:No.

\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-693l2c.doc 04/06

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Confidentiality Notice MCU is running and is configured to recognize the VNAGeneral Information Description of Major ComponentsMCU FLT LOS/RCL Connections to the Field Wiring Terminal BlocksSwitch and Jumper Settings DB long haul T1 signal and the MCU reports a T1 line faultDB limited long haul All front panel LEDs function normallyBus Clock Master Signal’s timing. The VNA is the T1 Clock MasterClock Slave VNA is a T1 Clock SlaveVNA uses T1 signaling Set the E1 Select switch according to the following tableDisabled. This setting is recommended Set the Reserved switches according to the following tableSecond InternalDIPSwitchSW1 Settings Model 69320-101 Voice Network Adapter Board Layout Diagram Changingto a69320-101VNA froma 69266-001T1 Interface Means closed means open Installation Guidelines Installation Instructions Installation and MaintenanceOperation Removing the VNA Card from the Card RackFrequently Asked Questions Electrical SpecificationsEnvironmental Replacement PartsMechanical ApprovalReturn Policy Warranty

69320-101 specifications

The Hubbell 69320-101 is a robust and versatile electrical device designed for a variety of commercial and industrial applications. It stands out in the field of electrical solutions, combining innovative technologies with proven reliability. One of its main features is its ability to support a wide array of power and data requirements, making it an ideal choice for modern facilities looking to streamline their electrical systems.

One notable characteristic of the Hubbell 69320-101 is its durable construction. Built with high-quality materials, it is engineered to withstand harsh environments, ensuring longevity and consistent performance. This resilience is particularly important in settings that experience high traffic, exposure to heavy machinery, or challenging weather conditions.

Additionally, the Hubbell 69320-101 is equipped with advanced technologies that facilitate easy installation and maintenance. Its design includes features such as snap-on covers and easy access points, which help reduce installation time and simplify any necessary service procedures. This user-friendly design is essential for ensuring that technicians can perform their duties efficiently and safely.

The device also boasts enhanced safety features, such as ground fault protection and robust insulating properties. These safety mechanisms prevent electrical hazards and protect both users and connected equipment from potential damage. Such considerations are crucial for meeting various industry standards and regulations, providing peace of mind for operators and facility managers alike.

Another significant aspect of the Hubbell 69320-101 is its adaptability. It is compatible with a wide range of electrical systems, making it suitable for diverse projects ranging from office buildings to manufacturing plants. This flexibility allows users to integrate the Hubbell 69320-101 into existing infrastructures with minimal disruption, maximizing productivity.

Furthermore, the Hubbell 69320-101 comes with multiple configuration options, allowing users to tailor it to their specific power distribution and data needs. The ability to customize the device not only enhances usability but also ensures that it meets the unique demands of different applications.

In summary, the Hubbell 69320-101 is an outstanding electrical solution characterized by its durability, safety features, and adaptability. With its innovative design and technology, it continues to be a trusted choice for professionals seeking reliable electrical devices that can meet the challenges of today’s dynamic environments.
Top Page Image Contents