Hubbell 69320-101 manual Specifications, Electrical

Page 14

 

Pub. 42004-693L2C

Model 69320-101 Voice Network Adapter

Page: 14 of 15

Specifications

Electrical

Board

Power

950 mA maximum @ +5 V dc ± 5%

 

125 mA maximum @ +12 V dc ± 10%

 

125 mA maximum @ -12 V dc ± 10%

T1 Parameters

 

NOTE: the 69320-101 VNA is not compatible with the public switched telephone network.

Encoding

(Bipolar with 8 Zero Substitution) B8ZS

Framing

(Extended Superframe) ESF

T1 Cabling

 

Type

Twisted pair (i.e., CAT.5 ethernet)

Cable characteristic impedance

100 ohms nominal

Maximum cable length

6,000 feet

DigitalAudio - PartyLine orNarrowBandwidthPaging

Encoding

∝-Law per CCITT Recommendation G.711

Sampling rate

8 kHz ± 32 ppm

DigitalAudio -WideBandwidth Paging

 

Encoding

ADPCM 32 kbps, ∝-Law per CCITT Recommendation G.726

Sampling rate encoding

8 kHz up sampled to 16 kHz ± 32 ppm

Sampling rate decoding

16 kHz down sampled to 8 kHz ± 32 ppm

CardRackPageAudiofromoneVNAtoanotherVNA in adifferentCardRack– NarrowBandwidth

Frequency response

250 Hz to 3.5 kHz ± 0.5 dB

Distortion

THD <2.0% @ 1,020 Hz sine wave, -10 dB ref. 1.5 Vrms

CardRackPageAudiofromoneVNAtoanotherVNA in adifferentCardRack– WideBandwidth

Frequency response

250 Hz to 3.5 kHz ± 0.5 dB

Distortion

THD <2.0% @ 1,020 Hz sine wave, -10 dB ref. 1.5 Vrms

CardRackPartyAudio fromoneVNAtoanotherVNAin adifferentCardRack

Frequency response

250 Hz to 3.5 kHz ± 0.5 dB

Distortion

THD <2.0% @ 1,020 Hz sine wave, -10 dB ref. 1.5 Vrms

\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-693l2c.doc 04/06

Image 14
Contents General Information MCU is running and is configured to recognize the VNAConfidentiality Notice Description of Major ComponentsMCU FLT Connections to the Field Wiring Terminal Blocks LOS/RCLSwitch and Jumper Settings DB limited long haul T1 signal and the MCU reports a T1 line faultDB long haul All front panel LEDs function normallyClock Slave Signal’s timing. The VNA is the T1 Clock MasterBus Clock Master VNA is a T1 Clock SlaveDisabled. This setting is recommended Set the E1 Select switch according to the following tableVNA uses T1 signaling Set the Reserved switches according to the following tableSecond InternalDIPSwitchSW1 Settings Model 69320-101 Voice Network Adapter Board Layout Diagram Changingto a69320-101VNA froma 69266-001T1 Interface Means closed means open Operation Installation and MaintenanceInstallation Guidelines Installation Instructions Removing the VNA Card from the Card RackFrequently Asked Questions Specifications ElectricalMechanical Replacement PartsEnvironmental ApprovalWarranty Return Policy

69320-101 specifications

The Hubbell 69320-101 is a robust and versatile electrical device designed for a variety of commercial and industrial applications. It stands out in the field of electrical solutions, combining innovative technologies with proven reliability. One of its main features is its ability to support a wide array of power and data requirements, making it an ideal choice for modern facilities looking to streamline their electrical systems.

One notable characteristic of the Hubbell 69320-101 is its durable construction. Built with high-quality materials, it is engineered to withstand harsh environments, ensuring longevity and consistent performance. This resilience is particularly important in settings that experience high traffic, exposure to heavy machinery, or challenging weather conditions.

Additionally, the Hubbell 69320-101 is equipped with advanced technologies that facilitate easy installation and maintenance. Its design includes features such as snap-on covers and easy access points, which help reduce installation time and simplify any necessary service procedures. This user-friendly design is essential for ensuring that technicians can perform their duties efficiently and safely.

The device also boasts enhanced safety features, such as ground fault protection and robust insulating properties. These safety mechanisms prevent electrical hazards and protect both users and connected equipment from potential damage. Such considerations are crucial for meeting various industry standards and regulations, providing peace of mind for operators and facility managers alike.

Another significant aspect of the Hubbell 69320-101 is its adaptability. It is compatible with a wide range of electrical systems, making it suitable for diverse projects ranging from office buildings to manufacturing plants. This flexibility allows users to integrate the Hubbell 69320-101 into existing infrastructures with minimal disruption, maximizing productivity.

Furthermore, the Hubbell 69320-101 comes with multiple configuration options, allowing users to tailor it to their specific power distribution and data needs. The ability to customize the device not only enhances usability but also ensures that it meets the unique demands of different applications.

In summary, the Hubbell 69320-101 is an outstanding electrical solution characterized by its durability, safety features, and adaptability. With its innovative design and technology, it continues to be a trusted choice for professionals seeking reliable electrical devices that can meet the challenges of today’s dynamic environments.