IBM DS4000, DS3000, DS5000 manual Atto Config Tool Features, Atto OS X Driver Installation

∙Multipathing is the ability to send I/O over multiple paths to the same LUN

∙Failover and load balancing done on a LUN basis

∙Monitors I/O paths – identifies changes in path status

∙Automatic re-routing of I/O upon detection of an interrupted connection

∙Failover/failback transparent to the OS or application

∙Increase performance by sending data over multiple paths

ATTO Config Tool Features

∙Allows simple Setup for the user. This is critical as IT staffs in the digital video industry are limited.

∙Shows the number of paths

∙Shows the status of each connection

∙ Displays valuable FC Target and Initiator info (ex. WWPN, WWNN, etc)

∙Shows path data flow information in bytes

∙“Locate” button to blink the LED of the Fibre port associated with the path selected.

ATTO OS X Driver Installation

∙Download the latest driver file from www.attotech.com/soultions/ibm

∙*** Driver does not ship with standard ATTO product ***

∙Double-Click the osx_drv_celerity8_131MP.dmg file

∙(This will create and launch the disk image)

∙Click continue to agree to the “Software License Agreement”

∙Select the “Destination drive (boot drive)” and select continue

∙The driver will now automatically install

∙Reboot the machine

Digital Media Storage Solution Installation Guide	20
© Copyright 2010, IBM Corporation. All rights reserved.