IBM L170p manual User

Problem	Possible	Suggested Action	Reference
	Cause
Screen is blank	Brightness		User
and power	and Contrast	Adjust brightness and	controls
indicator is	may be too	contrast.	section on
steady green	low		page 18
		Press any key on the
	The monitor is	keyboard or move the	Power
		mouse to restore
	in the Power		Management
		operation.
	Management		section on
		Check the Power
	Standby state		page 25
		Management software on
		your computer
		Check that the signal	Connecting
Screen is blank		cable is firmly connected to
	The monitor is		your Monitor
and power		the computer.
	not receiving		for Analog
indicator is		Check that no pins are
	a video signal		section on
steady amber		bent in the signal cable
			page 6
		connector.
		Press any key on the
	The monitor is	keyboard or move the	Power
	in the Power	mouse to restore
			Management
	Management	operation.
			section on
	Suspend or	Check the Power
			page 25
	Off state	Management software on
		your computer.
Screen is blank	Display mode		Further
and power	of the	Reconfigure the
indicator is	computer is		Information
		computer to use a
Flashing green	outside the		section on
		supported display mode.
every 0.5	range of the		page 23
second	monitor
	There are	Select Image Setup	User
Image appears		menu in the OSD. Then	controls
	noises in the
to be smeared		select MANUAL to adjust	section on
	video signal
		Phase/Clock settings.	page 18
Image appears	The Color		User
		Adjust the Color	controls
to be	setting may
		settings.	section on
discolored	be incorrect
			page 18

27

FRANÇAIS ENGLISH

COMPL & WARR JAPANESE ITALIANO ESPAÑOL