IBM L150 manual Problem Possible Suggested Action, Select Image Setup

Problem	Possible	Suggested Action	Reference
	Cause

			User
			Controls
Screen is blank	Brightness		Accessible
and power	and Contrast	Adjust brightness and	Via On
indicator is	may be too	contrast.	Screen
steady green	low		Display
			(OSD) section
			on page 15
		Press any key on the
		keyboard or move the	Power
	The monitor is	mouse to restore
			Management
	in the Power	operation.
			section on
	Saving state	Check the Power
			page 21
		Management software on
		your computer
		Check that the signal	Connecting
	The monitor is	cable is firmly connected to
		the computer.	your Monitor
	not receiving
		Check that no pins are	section on
	a video signal
Screen is blank		bent in the signal cable	page 6
and power		connector.
indicator is
		Press any key on the
blinking green.
		keyboard or move the	Power
	The monitor is	mouse to restore
			Management
	in the Active	operation.
			section on
	Off state	Check the Power
			page 21
		Management software on
		your computer.
	Display mode		Further
	of the	Reconfigure the
	computer is		Information
		computer to use a
	outside the		section on
		supported display mode.
	range of the		page 20
	monitor
	There are	Select Image Setup	User
Image appears		menu in the OSD. Then	Controls
	noises in the
to be smeared		select MANUAL to adjust	section on
	video signal
		Phase/Clock settings.	page 17
Image appears	The Color		User
		Adjust the Color	Controls
to be	setting may
		settings.	section on
discolored	be incorrect
			page 17

FRANÇAIS ENGLISH

COMPL & WARR JAPANESE ITALIANO ESPAÑOL

23