Paper Handling Options, Print Quality, Print Area

Family 2785+01 IBM Infoprint 2085

requires both of these, it will be stapled only.

Optional hole-punching kits are available. See Paper Handling Options section for a description of the punch kits. Only one punch kit may be installed at a time and it requires a CE to install or change the kits. Punch jobs can go to the shift tray or proof tray.

Paper Handling Options

●4,550-Sheet High Capacity Feeder (feature numbers 4520/4521)

This feature has three trays for 4,550-sheet capacity. Trays 4 and 5 have 1,000-sheet capacity each and tray 6 has 2,550-sheet capacity.

●A3/11" x 17" Tray Kit (feature numbers 4500/4501)

This option supports large size media including A3/11 x 17 in. media. It replaces the standard tray 1 (tandem tray) which cannot be used again without a CE involvement. This tray is supported in tray 1 only and has a capacity of 1,000 sheets. Media supported in this tray include A3 SEF, B4 SEF, A4 SEF, A4 LEF, 11" x 17" SEF, Letter SEF, Letter LEF, and Legal SEF.

●2-Hole Punch Kit for Finisher (feature numbers 4620/4621)

This option supports 2-hole punching in the European and Japan format.

●2-Hole Punch Kit for Finisher (feature numbers 4622/4623) This option supports 2-hole punching in the U.S. format.

●3-Hole Punch Kit for Finisher (feature numbers 4624/4625) This option supports 3-hole punching.

●4-Hole Punch Kit for Finisher (feature numbers 4626/4627) This option supports 4-hole punching.

●4-Hole Swedish Style Punch Kit for Finisher (feature numbers 4628/4629) This option supports Swedish style 4-hole punching.

Print Quality

Infoprint 2085 and 2105 offer high-quality print resolution of 600 x 600 dpi. Both printers support up to 256 levels of gray for IOCA images.

There are three print modes; Refine, Normal, and Econo. Refine mode is the default and offers the best overall print quality. Normal mode is slightly darker than Refine mode and Econo mode is slightly lighter with reduced toner usage.

For AFP/IPDS, resolutions of 240, 600, or AUTO, the print mode must be set to enhanced print mode. Enhanced print mode produces the optimal print quality; however, complex jobs may print slower. Standard print mode is available for optimal performance of complex print jobs.

Print Area

Both printers support a printable area of within 4 mm of the edge on all sides for IPDS and PCL/PostScript data streams. Edge-to-edge mode allows printing to within 2 mm leading edge and 0 mm on all other edges of the media.

Maximum Monthly Usage

The maximum monthly usage for both Infoprint 2085 and 2105 is 800,000 impressions. IBM does not recommend printing to this monthly maximum on a consistent basis.

Average Monthly Usage

http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (4 of 47)5/25/2005 7:01:07 AM