Billion Electric Company BIPAC-5100S user manual PPPoE

3.10.1 PPPoE

Select PPPoE from the Encapsulation drop-down list box in the first wizard screen to display the screen as shown.

The following table describes the labels in this screen.

LABEL	DESCRIPTION
Service Name	Type the name of your PPPoE service here.
User Name	Configure User Name and Password fields for PPPoA and PPPoE encapsulation
	only. Enter the user name exactly as your ISP assigned. If assigned a name in the
	form user@domain where domain identifies a service name, then enter both
	components exactly as given.
Password	Enter the password associated with the user name above.
IP Address	A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
	fixed; the ISP assigns you a different one each time you connect to the Internet. The
	Single User
	Account feature can be used with either a dynamic or static IP address.
	Select Obtain an IP Address Automatically if you have a dynamic IP address;
	otherwise select Static IP Address and type your ISP assigned IP address in the IP
	Address text box below.
Connection	Select Connect on Demand when you don't want the connection up all the time and
	specify an idle time-out (in seconds) in the Max. Idle Timeout field. The default
	setting selects Connection on Demand with 0 as the idle time-out, which means
	the Internet session will Select Nailed-Up Connection when you want your
	connection up all the time. The BIPAC-5100S will try to bring up the connection
	automatically if it is disconnected.

17