Cisco Systems EHWIC1GESFPCU instruction

Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards

First Published: March 15, 2011

This document describes how to configure the Cisco Gigabit Ethernet enhanced high-speed WAN interface card (EHWIC). The EHWIC 1 GE-SFP-CU can be installed on the Cisco Integrated Services Routers Generation 2 (ISR G2) family platforms and has a dual-purpose uplink (DPU) that can run in small-form-factor pluggable (SFP) or copper mode. It supports the following features:

•Digital Optical Monitoring (DOM)

•Support for T1/E1 and T3/E3 SFPs

•Support for the Ethernet passive optical network (EPON) SFP

EHWIC 1 GE-SFP-CU is the SKU for the single port EHWIC.

For a list of SFPs supported on the EHWIC 1 GE-SFP-CU, see Connecting Gigabit Ethernet High-Speed WAN Interface Cards document at the following URL: http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/EHWIC_1_ GE_SFP_CU.html.

Finding Feature Information in This Module

Your Cisco IOS software release may not support all of the features documented in this module.

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA