Cisco Systems EHWIC1GESFPCU manual Enable Configure terminal Service unsupported-transceiver

Configuring Third-Party SFPs

•1000 Mbps speed for 1000BASE SFPs

•Only the following routers and modules support third-party SFPs:

•Cisco 2921 Integrated Services Router

•Cisco 2951 Integrated Services Router

•Cisco 3900 Integrated Services Router

•Cisco 3900E Series Integrated Services Routers

•Cisco 892-F Gigabit Ethernet Security Router

•Cisco 898-EA Gigabit Ethernet Security Router

•EHWIC-1GE-SFP

SUMMARY STEPS

1.enable

2.configure terminal

3.service unsupported-transceiver

4.interface type slot/subslot/port number

5.media-type sfp

6.speed value

7.shutdown

8.no shutdown

9.exit

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable	Enables the privileged EXEC mode.
		Enter your password if prompted.
	Example:
	Router> enable
Step 2	configure terminal	Enters the global configuration mode.
	Example:
	Router# configure terminal
Step 3	service unsupported-transceiver	Enables third-party SFP support.
	Example:
	Router(config)# service
	unsupported-transceiver

Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards

14 OL-24318-02