Fujitsu Siemens Computers C Series manual Module, Settings under Windows, Windows XP

Working with the notebook

Operating systems with ACPI (Windows 2000 and Windows XP)

If an operating system with ACPI (Advanced Configuration and Power Management Interface) is installed on your notebook, you can set the power management fetaures via the operating system (e.g. Standby, Hibernate mode and LCD off).

i	Settings for energy-saving functions in the BIOS Setup are not taken into account by
	operating systems with ACPI.

Settings under Windows 2000

You can set the power-management features for your notebook under Start - Settings - Control Panel - Power Options.

Under Windows 2000 the Hibernate mode is switched off in the default setting.

i	Under Windows 2000 the required memory space on the hard disk is not reserved until
	you make the required Hibernate mode settings.

Additional information on this service programme is contained in your operating system help files.

Windows XP

You can set the power-management features for your notebook under Start - Control Panel - Power Options.

Under Windows XP the Hibernate mode is switched off in the default setting.

i	Under Windows XP the required memory space on the hard disk is not reserved until you
	make the required Hibernate mode settings.

Additional information on this service programme is contained in your operating system help files.

Module

The design of your notebook enables the flexible use of notebook batteries and drives. The following modules can be operated in the module slot of your notebook:

•CD-ROM drive

•DVD-ROM drive

•Hard disk drive

•Combo drive (CD-RW/DVD)

•Second battery

•Weight Saver

!	Only use modules designed for your notebook.
	Do not use force when installing or removing the module.

Make sure that no foreign objects enter the module bay.

A26391-K136-Z120-2-7619 39