Environmental and System Requirements
Environmental and System Requirements
This section describes the environmental and system requirements.
•Environmental Requirements, page 9
•System Requirements, page 9
•Memory Requirements, page 9
•Power Supply, page 10
•Hardware Supported, page 10
•Software Compatibility, page 10
Environmental Requirements
Table 2 lists the environmental requirements for the CSM.
Table 2 | CSM Environmental Requirements |
|
|
|
|
Item |
| Specification |
|
| |
Temperature, ambient operating | 0o to 40oC (32o to 104oF) | |
Temperature, ambient nonoperating | ||
Humidity (RH), ambient (noncondensing) | 10% to 90% | |
operating |
|
|
|
| |
Nonoperating relative humidity (noncondensing) | 5% to 95% | |
|
|
|
System Requirements
Before you install the CSM i the Catalyst 6500 series switch, make sure that the switch meets the hardware and software requirements listed in this section.
Caution You can use the Multilayer Switch Feature Card (MSFC), which is internal to the Catalyst 6500 series switch, to route traffic on either the client side or the server side of the CSM, but not both simultaneously (unless
Memory Requirements
The CSM memory is not configurable.
CSM software release 4.1(2) requires Cisco IOS Software Release 12.1(8a)EX or higher. However, the features new to CSM release 4.1(2) are available only with Cisco IOS Software Release 12.1(19) E and Catalyst operating system software release 7.6 and higher.
Catalyst 6500 Series Switch Content Switching Module Installation Note
| 9 |
| |
|
|